Mark this thread as Unsold
FS[MidAtl]: 1996 Jeep XJ Part Out (Richmond VA)
09-27-2014, 07:00 PM
#1
Former Sponsor
Thread Starter
Join Date: Mar 2013
Location: Short Pump Va.
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 HO
1996 Jeep XJ Part Out (Richmond VA)
96 XJ Part Out
I am listing this for my Brother, so please post up or PM me with any questions.
This was going to be his DD when it was bought stock a few years ago, however when it was being delivered on a roll back (via the wheel lift) it fell off when the support arm broke and slid straight between the E's on the Jeep logo into a pine tree at around 25 mph. I swear you couldn't have hit it any more center if you tried
Needless to say this severely bent the front frame rails. Thus causing the steering wheel to be out of center (see pic). It was reassembled with junk yard parts (Cross member, front clip, etc) but seeing as the frame was never properly fixed we decided not to put it on the road.
He went on to modify it for off road use but has since lost interest in it and is looking to part it out. It has been used on our property for the past few years, hence the 150 miles since we got it.
The engine has 237,072 miles and when we got (around 132 miles ago, look at the trip mileage) we were told it needed a head gasket. We replaced it when we had the front clip off. The cylinder walls, cylinder head and block were checked by a machine shop and a new head gasket was installed and it works fine now, engine has lots of power. Makes good oil pressure as well. The head gasket has less than 150 miles on it.
The Automatic transmission is in good shape.
Part Time Transfer case works.
Front and Rear axles function properly, stock gears (Dana 30, Chrysler 8.25)
Airbag has been removed, cruise control has been removed, AC condenser has been removed, radio has been removed, windshield is broken.
Power windows / locks. Power windows work, power locks work every now and then.
Front windows not tinted, rear doors, rear windows, and gate came tinted stock.
ZJ Front Tie Rod
3'' Rough Country Lift Kit, Coils front, add a leafs rear, shocks, all with less than 150 miles on it.
Rust Free but some dents / dings on some panels.
Not pictured is the airbag, and some misc interior pieces from the back of the Jeep, including the back to the back seat.
____________________________
Wheels / 33" Tires - SOLD
Front Drive shaft - Sold
Bumper - Sold
Hood - Not for sale.
Catalytic converter - Not for sale.
____________________________
With the exception of those items listed ^ everything in the following pictures are available so just let me know what you want and i'll get you a price.
I will update as parts are sold.
All parts sold AS-IS
Local pickup or will ship.
Thanks
I am listing this for my Brother, so please post up or PM me with any questions.
This was going to be his DD when it was bought stock a few years ago, however when it was being delivered on a roll back (via the wheel lift) it fell off when the support arm broke and slid straight between the E's on the Jeep logo into a pine tree at around 25 mph. I swear you couldn't have hit it any more center if you tried
Needless to say this severely bent the front frame rails. Thus causing the steering wheel to be out of center (see pic). It was reassembled with junk yard parts (Cross member, front clip, etc) but seeing as the frame was never properly fixed we decided not to put it on the road.He went on to modify it for off road use but has since lost interest in it and is looking to part it out. It has been used on our property for the past few years, hence the 150 miles since we got it.
The engine has 237,072 miles and when we got (around 132 miles ago, look at the trip mileage) we were told it needed a head gasket. We replaced it when we had the front clip off. The cylinder walls, cylinder head and block were checked by a machine shop and a new head gasket was installed and it works fine now, engine has lots of power. Makes good oil pressure as well. The head gasket has less than 150 miles on it.
The Automatic transmission is in good shape.
Part Time Transfer case works.
Front and Rear axles function properly, stock gears (Dana 30, Chrysler 8.25)
Airbag has been removed, cruise control has been removed, AC condenser has been removed, radio has been removed, windshield is broken.
Power windows / locks. Power windows work, power locks work every now and then.
Front windows not tinted, rear doors, rear windows, and gate came tinted stock.
ZJ Front Tie Rod
3'' Rough Country Lift Kit, Coils front, add a leafs rear, shocks, all with less than 150 miles on it.
Rust Free but some dents / dings on some panels.
Not pictured is the airbag, and some misc interior pieces from the back of the Jeep, including the back to the back seat.
____________________________
Wheels / 33" Tires - SOLD
Front Drive shaft - Sold
Bumper - Sold
Hood - Not for sale.
Catalytic converter - Not for sale.
____________________________
With the exception of those items listed ^ everything in the following pictures are available so just let me know what you want and i'll get you a price.
I will update as parts are sold.
All parts sold AS-IS
Local pickup or will ship.
Thanks
09-29-2014, 11:24 AM
#3
Former Sponsor
Thread Starter
Join Date: Mar 2013
Location: Short Pump Va.
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 HO
^ PM SENT ^
As mentioned in the previous post I am listing this for my brother.
He gave me a list of prices this morning, All prices are OBO -
Engine $450
Trans / T case Combo $350
T.C. $100
Axles $350
Doors & Back Glass $350
Hatch $100
Gauge Cluster $100
T.C.V. $75
Seats $225
Brake Booster & master cylinder $75
Steering Column (tilt) with key $125
P.C.M (ECM) $100
3" Rough Country AAL $250
Steering Box - Make Offer
If you don't see the part your interested in listed just ask and make an offer. He still has a lot of misc parts he pulled off it.
Will Ship!!!
He stripped it down to just the shell over the weekend however it'll be going to the scrap yard in the next day or two. Shell is rust free if you want him / me to plasma cut any patch panels out for your Jeep. Can even cut the whole roof off as it's in good shape.
Can hold parts long term if paid for.
Thanks for looking
As mentioned in the previous post I am listing this for my brother.
He gave me a list of prices this morning, All prices are OBO -
Engine $450
Trans / T case Combo $350
T.C. $100
Axles $350
Doors & Back Glass $350
Hatch $100
Gauge Cluster $100
T.C.V. $75
Seats $225
Brake Booster & master cylinder $75
Steering Column (tilt) with key $125
P.C.M (ECM) $100
3" Rough Country AAL $250
Steering Box - Make Offer
If you don't see the part your interested in listed just ask and make an offer. He still has a lot of misc parts he pulled off it.
Will Ship!!!
He stripped it down to just the shell over the weekend however it'll be going to the scrap yard in the next day or two. Shell is rust free if you want him / me to plasma cut any patch panels out for your Jeep. Can even cut the whole roof off as it's in good shape.
Can hold parts long term if paid for.
Thanks for looking
Trending Topics
10-12-2014, 05:39 PM
#8
Former Sponsor
Thread Starter
Join Date: Mar 2013
Location: Short Pump Va.
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 HO
It's not cruise control, $45 Shipped
Make an offer.
He's going to think about it and get back to me with an answer.
