Mark this thread as Unsold
FS[GreatLakes]: 12 XJ Part Outs
#17
Junior Member
Thread Starter
Join Date: Feb 2013
Location: Holland, Michigan
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0L
#18
#20
Junior Member
Thread Starter
Join Date: Feb 2013
Location: Holland, Michigan
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0L
#22
Junior Member
Thread Starter
Join Date: Feb 2013
Location: Holland, Michigan
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0L
#23
CF Veteran
Join Date: Dec 2010
Location: Rocket Country MI
Posts: 1,240
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
#24
I'm looking for a 97+ gauge cluster (with good clear plastic) transfer case and transmission bezels, hvac, and rocker switch panel with at least defrost and washer switches. I'll also need the transmission and transfer lamp sockets with a few inches of wire.
I don't care about miles on the gauge cluster. Don't care what transfer case bezel either.
I'd like to be able to power the gauge cluster without plugging into a dash, if you know how. I'm looking to bench test led bulbs. Tired of ripping my dash apart. Stuff is getting broken.
I don't care about miles on the gauge cluster. Don't care what transfer case bezel either.
I'd like to be able to power the gauge cluster without plugging into a dash, if you know how. I'm looking to bench test led bulbs. Tired of ripping my dash apart. Stuff is getting broken.
#25
Junior Member
Thread Starter
Join Date: Feb 2013
Location: Holland, Michigan
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0L
I'm looking for a 97+ gauge cluster (with good clear plastic) transfer case and transmission bezels, hvac, and rocker switch panel with at least defrost and washer switches. I'll also need the transmission and transfer lamp sockets with a few inches of wire. I don't care about miles on the gauge cluster. Don't care what transfer case bezel either. I'd like to be able to power the gauge cluster without plugging into a dash, if you know how. I'm looking to bench test led bulbs. Tired of ripping my dash apart. Stuff is getting broken.
#28
Junior Member
Thread Starter
Join Date: Feb 2013
Location: Holland, Michigan
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0L
Sorry everyone who wanted quotes today. My shops booked out until Thursday and I'm doing my best to catch up.
#29
CF Veteran
Join Date: May 2013
Location: Washington, MO
Posts: 1,056
Likes: 0
Received 1 Like
on
1 Post
Year: 2000
Model: Cherokee
Engine: 4.0
Hi,
Do you have the rubber grommet and hose assembly going from the valve cover to the manifold?
I don't need the plastic elbow on the valve cover.
63090
I have paypal, thanks.
Do you have the rubber grommet and hose assembly going from the valve cover to the manifold?
I don't need the plastic elbow on the valve cover.
63090
I have paypal, thanks.