Mark this thread as Unsold
FS[PacSouthWest]: Cowl hood
#1
Junior Member
Thread Starter
Join Date: May 2013
Location: SoCal
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0l
#7
Junior Member
Thread Starter
Join Date: May 2013
Location: SoCal
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0l
Trending Topics
#10
Junior Member
Thread Starter
Join Date: May 2013
Location: SoCal
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0l
If your interested, PM me your name and email and I'll be able to send pictures easier. This app is weird on my phone. Also leave your area code so I can find out the shipping cost. Thanks! -Ian
#13
Junior Member
Thread Starter
Join Date: May 2013
Location: SoCal
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0l
The hood is steel, welded, perfected with minimal Bondo and then primered. Paint is your responsibility because my sprayer only does primer because it's so thin.
I have a number of hoods in the process of being built so for those who want one expect a delay. I will be working non stop till I can get these done and start on some more! Bear with me, if they were easy to build no one would have me do them! Thanks for the PM's guys, I'll have updates on shipping costs via UPS, and greyhound; whichever is cheaper.
Just a reminder: specify the space you want in back. From 1"-3"; anything more looks outrageous on an XJ/MJ.
I'm also experimenting building my own hood vents so when I get then down and perfected I'll be sure to let you all know for those who prefer that route.
These hoods are not indestructible!! If one of your buddies decide to hop on the cowl it will damage it! I advise you all who will eventually get one to instill sense into your friend's mind. Said that, I'm mocking up a way to make a frame for the inside to fully support it and be able to hold weight. (For those of you who like to barely dress your ladies and have them pose on your rig) there's such limited space I'll see what I can do. But it does come with vertical supports to allow you to put your rifles, ammo, or anything except a body on.
Again: PLEASE LEAVE EMAILS OR NUMBERS IF YOU WISH TO RECEIVE PICTURES FASTER. YOU CAN TEXT ME DIRECTLY AT 1-909-362-3771
My name is Ian, I'm a college student but you will get your hoods. It just takes time. Thanks forum members!
I have a number of hoods in the process of being built so for those who want one expect a delay. I will be working non stop till I can get these done and start on some more! Bear with me, if they were easy to build no one would have me do them! Thanks for the PM's guys, I'll have updates on shipping costs via UPS, and greyhound; whichever is cheaper.
Just a reminder: specify the space you want in back. From 1"-3"; anything more looks outrageous on an XJ/MJ.
I'm also experimenting building my own hood vents so when I get then down and perfected I'll be sure to let you all know for those who prefer that route.
These hoods are not indestructible!! If one of your buddies decide to hop on the cowl it will damage it! I advise you all who will eventually get one to instill sense into your friend's mind. Said that, I'm mocking up a way to make a frame for the inside to fully support it and be able to hold weight. (For those of you who like to barely dress your ladies and have them pose on your rig) there's such limited space I'll see what I can do. But it does come with vertical supports to allow you to put your rifles, ammo, or anything except a body on.
Again: PLEASE LEAVE EMAILS OR NUMBERS IF YOU WISH TO RECEIVE PICTURES FASTER. YOU CAN TEXT ME DIRECTLY AT 1-909-362-3771
My name is Ian, I'm a college student but you will get your hoods. It just takes time. Thanks forum members!