Cherokee_Laredo

I have the 97-01 Cherokee dash, charcoal colored mounted to 84-96 Cherokee dash, I was doing a custom design of adding the new interior dash in my Cherokee, Was almost done but I never have time anymore to do any work to my mods, The dash part of 97-01 are still in perfect condition and good for replacements or to even finish the project if you'd like. I modded the 84-96 so that the new dash parts snap into place, So the 97-01 dash parts are still in their normal condition. Have extra Left/Right vents and Tan glovebox too and can have with it. Recommend pickup Close by, 15670. Cant ship.

alpine.adrenaline

So you've modified a '97-'01 dash to snap right into an '84-'96 firewall? Interested...

Cherokee_Laredo

The 84-96 is still left the same to reconnect back to normal in your pre 1996. So not modding / cutting up you Cherokee inside if you do want everything back to normal. I got a dash out of a 94-95 Cherokee, Cut the shape out to fit the newer dash plastics on. I got one half screwed in through the factory screw holes. I didnt get the glove box side done yet. https://www.cherokeeforum.com/f46/19...49861/index17/ "On bottom of page" These are just laying on the dash in these pics with the other colored parts but have the complete dark matching set. I can probably get a more recent pic, I have it all together sitting on the floor. I read that you can switch to the newer dash but that requires the firewall inside frame and then cutting in new holes, So I went my own rout and did it this way. And the other way required to remove the steering wheel because it is one Pies and saw it at the JY. Also if you do this your going to need the center console too.