14 Attachment(s)
I have came up with a switch panel that takes place of the blank panel to the right of the instrument panel in the 96 & earlier XJs
After re-designing this 4x I think it's ready for the forums! (THESE ARE 100% HAND MADE) I have a 6 switch panel and a 9 switch panel. 4 different color switches and 8 different color vinyl backgrounds. Switch Light Colors: Green , Blue, Red, Yellow Vinyl Colors: Flat Black Metallic Flat Blue Gloss Red Flat Lime Green Carbon Fiber Lime Green Carbon Fiber Red Carbon Fiber Black Carbon Fiber Silver I will be taking your customs orders so post what combo you'd like! 9 switch panel - $45 shipped/PPed 6 switch panel - $40 shipped/PPed These switch panels are 100% HAND MADE, which means hand measured, hand bent, hand drilled, and hand wrapped. They are most likely NOT going to be perfect. I apologize if this is an inconvenience, I am not perfect by any means. |
Already in the process of designing for 97+ and other places for 96 & earlier
|
Got mine in this weekend, these things are a great use of that wasted space! Fit and finish we're awesome on mine!
|
Originally Posted by BenJammin25
(Post 2824067)
Already in the process of designing for 97+ and other places for 96 & earlier
|
Originally Posted by navyjeeper01
(Post 2829141)
Anything yet on the 97+? |
Do these come with the switches, or is is just the panel? If they do come with, do you have switches with green light?
|
Originally Posted by TXDESSI
(Post 2829821)
Do these come with the switches, or is is just the panel? If they do come with, do you have switches with green light?
Light on switches choices are green, yellow, blue, and red. In the pic that has 4 switches with a red carbon fiber background has one of each so u can see. |
Originally Posted by BenJammin25
(Post 2829895)
Yes the switches come with! And yes I have green! Light on switches choices are green, yellow, blue, and red. In the pic that has 4 switches with a red carbon fiber background has one of each so u can see. |
1 Attachment(s)
Originally Posted by TXDESSI
(Post 2830270)
Very cool, and a great price. One more question: would sell one without the wrap? I think I'd like to paint mine to match my painted gauge bezel. Would look like this: |
Originally Posted by BenJammin25
(Post 2830310)
But then how do I cover up the mistakes??!! Lol. There may be some not perfectly flat spots on the face , but ya I don't see why not. I can knock like $5 off of the price too if that's the case. Would look like this: |
Originally Posted by TXDESSI
(Post 2830323)
Not sure I could figure out how to cover up the flaws before painting (I don't have the skills). Let me think about it. |
I have those switches in my Jeep. Have you had a problem with the lights not working? The switch contacts work but the lights are iffy at best. Cool little panel.
|
Originally Posted by BenJammin25
(Post 2829672)
Working on a ash tray panel... Have had a couple projects and not too much interest so far so I've been working on other projects more frequently than these. If there is anywhere else you can think if LMK and ill figure something out
|
Originally Posted by navyjeeper01
(Post 2830707)
There's a little like long rectangle piece to the right of the gauges that looks like it was almost made for like a 3 switch panel |
Originally Posted by 94XjSport94
(Post 2830524)
I have those switches in my Jeep. Have you had a problem with the lights not working? The switch contacts work but the lights are iffy at best. Cool little panel.
|
when i actually get some lights I"m a hit you up Ben...
|
Originally Posted by BenJammin25
(Post 2830792)
I actually was looking at that spot this morning while drivin my wife's 98. Gonna have to pull it apart and come up with something
|
Originally Posted by stitch702
(Post 2831007)
when i actually get some lights I"m a hit you up Ben...
|
Originally Posted by navyjeeper01
(Post 2831023)
Seems super convenient lol I'm gonna be working on installing rear discs on my 96 tonight/tomorrow so after that ill start on that. |
Originally Posted by BenJammin25
(Post 2831041)
Ya... I agree. I'm gonna be working on installing rear discs on my 96 tonight/tomorrow so after that ill start on that.
|
Originally Posted by BenJammin25
(Post 2831041)
Ya... I agree. I'm gonna be working on installing rear discs on my 96 tonight/tomorrow so after that ill start on that.
|
Originally Posted by navyjeeper01
(Post 2831126)
I was looking into doing disks on the back how difficult is that? Seems pretty straight forward ... But I do also work on cars for a living! |
Originally Posted by BenJammin25
(Post 2831217)
Well I'm about 30 mins in, taking my time, and I have tires off, drums off, 10 studs hammered out of axle shafts, cover pulled and fluid drained, and axle shafts out. This is not including jacking it up. Oh ya and driveshaft disconnected at at rear pinion. Seems pretty straight forward ... But I do also work on cars for a living!
|
Originally Posted by navyjeeper01
(Post 2831222)
Yeahhhh I'm a highschool student sounds like 3 hours and a lot of head banging for me but you gotta learn somehow right? |
Bump
|
If I keep my xj I'll be getting a red one
|
Cool man LMK
|
Definitely looks awesome. Sign me up! I'll take one since I need a clean spot to wire all my **** up to
|
Have you tried making a panel with the factory clock in it?
|
Hi I'd like to buy a 6 switch blue light black carbon fiber wrap if you have one available
|
Sorry guys... Hadn't been checking this thread, haven't gotten too many responses. But I still have everything and I can make them, but would probably need some time to complete, the in -laws are coming to town so ill be busy this week and won't have a chance.
Just PM me with what you want and I'll lyk when they're ready. |
Originally Posted by Flexjay
(Post 2921737)
Definitely looks awesome. Sign me up! I'll take one since I need a clean spot to wire all my **** up to
|
Originally Posted by Proper
(Post 2928464)
Have you tried making a panel with the factory clock in it?
|
Originally Posted by danmagro1
(Post 2930505)
Hi I'd like to buy a 6 switch blue light black carbon fiber wrap if you have one available
|
Don't stop making these ill get one soon
|
$30 shipped / PayPal this week (Monday-Thursday) only for a 6 switch panel!!!
PM Me with orders!! |
1 Attachment(s)
|
Originally Posted by BenJammin25
(Post 2947821)
I'll take it for $30 |
Originally Posted by danmagro1
(Post 2949109)
I'll take it for $30 A similar one can be made, I can do $30 +$6 for shipping (USPS priority) |
Originally Posted by BenJammin25
(Post 2930628)
No, I sort of stopped trying new stuff only had sold a few of these, but I can look into it if there's interest |
All times are GMT -5. The time now is 10:12 PM. |
© 2024 MH Sub I, LLC dba Internet Brands