I have 4 sets of injectors. 2 are 703s and 2 are 784s. All have been cleaned and ohm tested and are within spec. I will ship injectors with or without new o-rings. Price without o-rings is $55 which includes shipping, or $70 with o-rings and also includes shipping. I'm located in eastern NC but am leaving in 2 weeks for college so I am trying to part with these before then. PM me with any questions.

 

Did u do the micro filters and pintle caps too?

 

I have not done the filters or pintle caps. I never found a source for them.

 

You can get the micro-filters on Ebay for like .44 each which means about $2.50 a set on injectors but it's worth it. You can get them cheaper if you buy in large volume. I usually try to salvage the nicer looking pintle caps and soak them over night in degreaser and they look like new.

 

I buy my o rings, pintle caps and micro filters in bulk on eBay

 

Thanks for the help guys. I'll look into that tomorrow and see what it will run me. Unless someone wants to buy them off me now I'll just hold on to them till I get off to school then rebuild them then and sell them once I get settled in. Thanks for the help.