FS[SouthEast]: Disc brake conversion kit
Junior Member
Joined: Oct 2014
Posts: 91
Likes: 3
From: PHX, AZ
Year: 1993
Model: Cherokee
Engine: 4.0L
Seasoned Member
Joined: Jun 2008
Posts: 499
Likes: 58
From: DFW
Year: 1997
Model: Cherokee
Engine: 4.0
Newbie
Joined: Jul 2018
Posts: 2
Likes: 0
Model: Cherokee (XJ)
☆☆☆ This is a active for sale thread ☆☆☆ Edited 10/4/2019 prices are current
I do not keep them in stock. I will offer them for sale as I get them. First come, first served.
Any pm asking "Do I still sell them" will be ignored. Thank you.
I will only be offering the Liberty backing plates & calipers. Nothing else. $200 shipped.
If I am able to find the ZJ parts to make a full kit I will post it.
-----------------------------------------------------------------------------------------------
I'm offering rear disc brakes to convert your Jeeps drums to disc's on a Dana 35 (will fit the c clip & non c clip model) 44, & Chrysler 8.25.
I will ship you everything you need to complete the conversion-minus rotors, usable E-brake shoes (shipped as cores) & possibly good pads. If you own a '97+ you can opt for a driver side E-brake cable for $10. I do not offer a passenger side E-brake cable. For the passenger side cable you can get one for a Liberty. For the '96 down you will not receive any e brake cables. You can reuse your cables if you have a small lift on any year XJ. All you need are 2 small cable clamps. Route the end around the actuator arm & clamp it. Or you can get new cables here.
https://www.cherokeeforum.com/f67/pa...7/#post3314054
With the Dana 44 you will need to get a set of bearing retainer plates. You will also need to redrill the holes in the backing plates to match the 44 housing mounting holes.
On the Dana 44 & Chrysler 8.25 you will need to enlarge the opening so it will slide over the axle tube.
With the c clip Dana 35 this is a direct bolt on.
$200 ('97 UP ONLY will need to add $10 if you want a drivers side e brake cable) for a ZJ/Dana 35 kit
or
IF AVAILABLE
$225 for a Liberty/Chrysler 8.25 kit shipped in the lower 48 states. Again, '97 & newer will need to add $10 if you want a drivers side e brake cable.
Please note: with the Liberty kits you will need ZJ soft lines
Here is a couple of write-up on the subject
-c clip Dana 35/Chrysler 8.25
https://www.cherokeeforum.com/f51/re...-8-25-a-57807/
-Dana 44
http://www.pirate4x4.com/tech/billav...kes/index.html
This is a idea of what you will be receiving, not pictured is the parts that go into the porportoning valve, which is included in the kit.
Attachment 352024
A video for the non c clip & Dana 44 guys
89 Cherokee Dana 35/44 Rear Disk Brake Conversion - YouTube
I do not keep them in stock. I will offer them for sale as I get them. First come, first served.
Any pm asking "Do I still sell them" will be ignored. Thank you.
I will only be offering the Liberty backing plates & calipers. Nothing else. $200 shipped.
If I am able to find the ZJ parts to make a full kit I will post it.
-----------------------------------------------------------------------------------------------
I'm offering rear disc brakes to convert your Jeeps drums to disc's on a Dana 35 (will fit the c clip & non c clip model) 44, & Chrysler 8.25.
I will ship you everything you need to complete the conversion-minus rotors, usable E-brake shoes (shipped as cores) & possibly good pads. If you own a '97+ you can opt for a driver side E-brake cable for $10. I do not offer a passenger side E-brake cable. For the passenger side cable you can get one for a Liberty. For the '96 down you will not receive any e brake cables. You can reuse your cables if you have a small lift on any year XJ. All you need are 2 small cable clamps. Route the end around the actuator arm & clamp it. Or you can get new cables here.
https://www.cherokeeforum.com/f67/pa...7/#post3314054
With the Dana 44 you will need to get a set of bearing retainer plates. You will also need to redrill the holes in the backing plates to match the 44 housing mounting holes.
On the Dana 44 & Chrysler 8.25 you will need to enlarge the opening so it will slide over the axle tube.
With the c clip Dana 35 this is a direct bolt on.
$200 ('97 UP ONLY will need to add $10 if you want a drivers side e brake cable) for a ZJ/Dana 35 kit
or
IF AVAILABLE
$225 for a Liberty/Chrysler 8.25 kit shipped in the lower 48 states. Again, '97 & newer will need to add $10 if you want a drivers side e brake cable.
Please note: with the Liberty kits you will need ZJ soft lines
Here is a couple of write-up on the subject
-c clip Dana 35/Chrysler 8.25
https://www.cherokeeforum.com/f51/re...-8-25-a-57807/
-Dana 44
http://www.pirate4x4.com/tech/billav...kes/index.html
This is a idea of what you will be receiving, not pictured is the parts that go into the porportoning valve, which is included in the kit.
Attachment 352024
A video for the non c clip & Dana 44 guys
89 Cherokee Dana 35/44 Rear Disk Brake Conversion - YouTube
I am interested in a kit for my 2001 xj. Michigan. Amermantrenton@gmail.com
