FS[SouthEast]: Disc brake conversion kit
#1276
CF Veteran
Thread Starter
I have shipped one to the border & the guy came across & picked it up. I'll ship it anywhere in the world as long a you cover the additional shipping costs.
Pm me your complete address & I'll get you a quote.
Pm me your complete address & I'll get you a quote.
#1278
CF Veteran
Thread Starter
In case anyone was interested, to ship to Canada is $110 & to South Africa is $200.
Current list I'm working on:
94xjdavid
Slee30
jfvXJ
SD
Penga89
Steven Burrell
BSACafe
Armando Cruz
BlackXJay
Holmes1997
Daniel J. O'Malley
JSPIRIT
I hope to get more kits next weekend for everyone.
Current list I'm working on:
94xjdavid
Slee30
jfvXJ
SD
Penga89
Steven Burrell
BSACafe
Armando Cruz
BlackXJay
Holmes1997
Daniel J. O'Malley
JSPIRIT
I hope to get more kits next weekend for everyone.
Last edited by Big David; 11-06-2017 at 03:43 PM.
#1279
Seasoned Member
Interested for 99 4wd 4.0. 8.25
You can put me on the list
#1282
CF Veteran
Thread Starter
I'm going this Friday to get as many as I can. To be perfectly honest, it will probably the middle of next month before I can go back. But plans are subject to change.
#1283
Newbie
Join Date: Apr 2015
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
96SE 4.0 8.25
#1284
CF Veteran
Thread Starter
Added.
I went last weekend & they only had 2 kits worth pulling. I will try again in a few weeks. Please be patiet. I haven't forgotten about y'all. Lol.
I went last weekend & they only had 2 kits worth pulling. I will try again in a few weeks. Please be patiet. I haven't forgotten about y'all. Lol.
#1285
Newbie
Join Date: Nov 2017
Location: Los Angeles
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999 Sport
Model: Cherokee(XJ)
Engine: 4.0 L6
I've PM'd you, David, as I'd like a kit please. Also had a couple questions in the PM, if you don't mind. Let me know if you prefer to keep conversations in this post instead.
#1286
CF Veteran
Thread Starter
Either is fine. Check your inbox.
I will try to get enough kits for everyone listed the week of Thanksgiving.
I will try to get enough kits for everyone listed the week of Thanksgiving.
#1288
CF Veteran
Thread Starter
Current list I'm working on:
94xjdavid
Steven Burrell
Armando Cruz
BlackXJay
Pending
Penga89
Holmes1997
Daniel J. O'Malley
JSPIRIT
I have 4 Liberty kits. I went to 3 yards & that's all they had. I am on the hunt for new yards to visit. I have PMed the first 3 but I can't find any messages from "SD". Please pm me.
I apologize for the delay.
94xjdavid
Steven Burrell
Armando Cruz
BlackXJay
Pending
Penga89
Holmes1997
Daniel J. O'Malley
JSPIRIT
I have 4 Liberty kits. I went to 3 yards & that's all they had. I am on the hunt for new yards to visit. I have PMed the first 3 but I can't find any messages from "SD". Please pm me.
I apologize for the delay.
Last edited by Big David; 11-25-2017 at 12:56 PM.
#1289
8.25 rear disc kit
Still selling these kits?
Rear disc brakes to convert your Jeeps drums to disc's on a Dana 35 (will fit the c clip & non c clip model) 44, & Chrysler 8.25.
I will ship you everything you need to complete the conversion-minus rotors, usable E-brake shoes (shipped as cores) & possibly good pads. If you own a '97+ you can opt for a driver side E-brake cable for $10. I do not offer a passenger side E-brake cable. For the passenger side cable you can get one for a Liberty. For the '96 down you will not receive any e brake cables. You can reuse your cables if you have a small lift on any year XJ. All you need are 2 small cable clamps. Route the end around the actuator arm & clamp it. Or you can get new cables here.
https://www.cherokeeforum.com/f67/pa...7/#post3314054
With the Dana 44 you will need to get a set of bearing retainer plates. You will also need to redrill the holes in the backing plates to match the 44 housing mounting holes.
On the Dana 44 & Chrysler 8.25 you will need to enlarge the opening so it will slide over the axle tube.
With the c clip Dana 35 this is a direct bolt on.
$200 ('97 UP ONLY will need to add $10 if you want a drivers side e brake cable) for a ZJ/Dana 35 kit
or
IF AVAILABLE
$225 for a Liberty/Chrysler 8.25 kit shipped in the lower 48 states. Again, '97 & newer will need to add $10 if you want a drivers side e brake cable.
Please note: with the Liberty kits you will need ZJ soft lines
Here is a couple of write-up on the subject
-c clip Dana 35/Chrysler 8.25
https://www.cherokeeforum.com/f51/re...-8-25-a-57807/
-Dana 44
http://www.pirate4x4.com/tech/billav...kes/index.html
This is a idea of what you will be receiving, not pictured is the parts that go into the porportoning valve, which is included in the kit.
Attachment 352024
A video for the non c clip & Dana 44 guys
89 Cherokee Dana 35/44 Rear Disk Brake Conversion - YouTube
I will ship you everything you need to complete the conversion-minus rotors, usable E-brake shoes (shipped as cores) & possibly good pads. If you own a '97+ you can opt for a driver side E-brake cable for $10. I do not offer a passenger side E-brake cable. For the passenger side cable you can get one for a Liberty. For the '96 down you will not receive any e brake cables. You can reuse your cables if you have a small lift on any year XJ. All you need are 2 small cable clamps. Route the end around the actuator arm & clamp it. Or you can get new cables here.
https://www.cherokeeforum.com/f67/pa...7/#post3314054
With the Dana 44 you will need to get a set of bearing retainer plates. You will also need to redrill the holes in the backing plates to match the 44 housing mounting holes.
On the Dana 44 & Chrysler 8.25 you will need to enlarge the opening so it will slide over the axle tube.
With the c clip Dana 35 this is a direct bolt on.
$200 ('97 UP ONLY will need to add $10 if you want a drivers side e brake cable) for a ZJ/Dana 35 kit
or
IF AVAILABLE
$225 for a Liberty/Chrysler 8.25 kit shipped in the lower 48 states. Again, '97 & newer will need to add $10 if you want a drivers side e brake cable.
Please note: with the Liberty kits you will need ZJ soft lines
Here is a couple of write-up on the subject
-c clip Dana 35/Chrysler 8.25
https://www.cherokeeforum.com/f51/re...-8-25-a-57807/
-Dana 44
http://www.pirate4x4.com/tech/billav...kes/index.html
This is a idea of what you will be receiving, not pictured is the parts that go into the porportoning valve, which is included in the kit.
Attachment 352024
A video for the non c clip & Dana 44 guys
89 Cherokee Dana 35/44 Rear Disk Brake Conversion - YouTube
#1290
Newbie
Join Date: Jun 2016
Location: Oklahoma
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee (XJ)
Engine: 4.0
my parts fella got me a brake set from a 2005-2010 grand cherokee. I se that the rotors are larger. Any idea if they will work on a 98 XJ 8.25?
Monte in OKla
Monte in OKla