tedparis

I have a 1998 Jeep Cherokee in very good condition I rebuilt most of it from the ground up and painted everything I replaced and repaired. It has 177,000 miles on the motor 225,000 on the transmission, axles, and body, a 3 inch BDS suspension lift with Rough Country track bar, lower control arms and the front pinion angle has been corrected with custom uppers to account for lift. The entire brake system had been replaced with stainless steel lines. I used POR-15 and Bed liner on almost everything and the Jeep has very little rust, as it is very clean and I have taken good care of it. Axles are stock HP Dana 30 and Chrysler 8.25 29 spline. Tires are 31 inch Wranglers with less then 7,000 miles on them. I am selling the Jeep to help pay for college. I am asking $5000. Title is clean and I have a file with receipts of almost all major purchases.

History on the vehicle is the owner before me I went to college with and he daily drove it to and from his internship and home. I have had it for a little over a year now and I just registered it a few months ago for the first time since the rebuild. I recently took it up north for the first time to do some trail riding and it handled very well! Please text/comment with any questions you have thank you. (858-213-659O)

What has been done:
New lower control arms (Rough Country)
New upper control arms (Custom)
New track bar (Rough Country)
Engine (fully painted, all new gaskets, new timing chain, new oil pump)
New clutch, Pressure Plate, throughout Bearing
Rebuilt front driveshaft
New Floor Pans with POR-15 on top and bed liner underneath
Wirewheeled and POR-15 the inside of the framerailes where I could
Stainless steel brake lines
Stainless steel evap line
New radiator
New AC lines
New AC condenser
New rear brake pads and drums painted with high temp paint
New parking brake handle and cables
New parking brake
All new fluids
Upgraded heavy duty steering
Skyjacker 7000 steering stabilizer
New steering box
All new painted exhaust system with high temp paint (Except for CAT)
No transfer case drop as Manual transmissions have a 2.5 inch longer driveshaft.