matholland

Located in Raleigh, IL 62977

Front/Rear bumpers
Warn 8000lb winch
4.10 gears with lockers front and rear
Ford 8.8 rear end swap 31 spline with iron rock offroad truss

Dana 30 sleeved, new spicer ujoints, I have converted the 2 piece vacuum disconnect axle over to the newer style shafts with the bigger 5-760x ujoints. This dana 30 also has the Mile marker locking hub conversion. New chromoly stub shafts, axle seals, new pinion bearings, new spindle bearings/seals, wheel bearings....etc I also have the factory setup for it as well.

JKS adjustable coil spacers with freshly built long arms...where it's set at now it has about 7.5" of lift
Over knuckle steering with heims
Quick disconnects for the sway bar
Transfer case has slip yoke eliminator installed
No carpet....rear passenger floorboard has been patched.
Power windows, power locks, power mirrors, powered seats
7 inch flip out cd/dvd/bluetooth with an amp to power the door speakers.
Has 35x14.50x15 TSL boggers mounted on 15x10 steel wheels
Herculined
Closed cooling system has been converted to the open system
Newer front end grill swap
It has around 230k on the clock. Runs great!

I know I'm forgetting a lot of things, but that's all of the important stuff. I just built these long arms, I ended up breaking one of the old ones and built new ones. Front end work only has 1 wheeling trip on it. I just moved into my first home and would rather have the cash sitting around...However, I might be interested in another rig.