Mark this thread as Unsold
[FS] jk Rubicon shocks
06-18-2013, 01:11 PM
#1
CF Veteran
Thread Starter
Join Date: Mar 2010
Location: Jacksonville, FL
Posts: 6,685
Likes: 0
Received 5 Likes
on
5 Posts
Year: 92
Model: Cherokee
Engine: 4.0
jk Rubicon shocks
These are the red body shocks off of a 2013 Jeep Rubicon, perfect condition. Only 500 miles on them.
Good swap for an xj with a 1-3" lift
$85 shipped anywhere in the U.S. For all 4 shocks and the barpins you need to do the swap
Good swap for an xj with a 1-3" lift
$85 shipped anywhere in the U.S. For all 4 shocks and the barpins you need to do the swap
06-18-2013, 01:22 PM
#3
CF Veteran
Thread Starter
Join Date: Mar 2010
Location: Jacksonville, FL
Posts: 6,685
Likes: 0
Received 5 Likes
on
5 Posts
Year: 92
Model: Cherokee
Engine: 4.0
Do you know how long the shocks are that are on it now?
06-18-2013, 01:29 PM
#4
Old School CF Moderator
Join Date: May 2010
Location: Chattanooga
Posts: 9,652
Likes: 0
Received 3 Likes
on
3 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
Stock shocks. Unsure of length.. I know they are too short though 
From what ive read they should work.
I found a set locally cheaper..if that falls through and you still have these ill be back.
From what ive read they should work.
I found a set locally cheaper..if that falls through and you still have these ill be back.
Trending Topics
07-04-2013, 03:37 PM
#13
CF Veteran
I have these on my '98 XJ. You will need to remove a metal sleeve from all 4 shocks. Then you will need to install the bar pins on the front shocks. I looked on you tube for a very easy way to remove the sleeves. The pins go in really easy with some WD-40.
They work really well.
They work really well.
07-04-2013, 03:52 PM
#14
CF Veteran
Thread Starter
Join Date: Mar 2010
Location: Jacksonville, FL
Posts: 6,685
Likes: 0
Received 5 Likes
on
5 Posts
Year: 92
Model: Cherokee
Engine: 4.0
I have these on my '98 XJ. You will need to remove a metal sleeve from all 4 shocks. Then you will need to install the bar pins on the front shocks. I looked on you tube for a very easy way to remove the sleeves. The pins go in really easy with some WD-40.
They work really well.
They work really well.