So my sway bar links that I have on are too long, they are 10" eye to eye, i need to be around 8-9. I found these Zone Disconnects for 100, and got some info from their engineers that they adjust 7 3/4 to 9 3/4 which is perfect. I am just wondering if anyone runs them as i see pretty decent reviews of their lift kits and products. I would go JKS but i just dont have the extra money right now. after dropping a ton on the lift, now I have to take my driver door off and try to get the hinge welded back in place as it completely seperated yesterday.

Any other disconnects are are good and around 100?

thanks!

RC makes some too. Not sure on the price, but I think it's less then 100

yeah, they are like 70, but beleive those are for 4.5 to 6, i have their fixed links for supposedly up to 4.5, but they are a bit too long, sway bar at a weird angle. so im probably going to stick to something else.

I think I need to lolkinto this too, on the 93 I jusy bought the q disconnects are missing straps and If I hit a large bump while they are attached the top gets jammed waaay up in the wheel well. Anyone know the legnth of stock links?

stock links on stock height is about 6 inches. for around 3-4 inch lift i was told a couple different lengths, between 8 and 8.75 inches.

mine is 10 eye to eye, more made for like 5 or 6 inch lift.

which ones do you have?

which ones do i have? If you are asking me, they are rough country. they are the ones I assume they send with teh 4.5 kit, they told me that the sway bar links are the same for their 4.5 kit and for their 6.5 kit, which seems a little odd or not right, i think these 10 inchers shouldnt even be used on a 4.5 kit, I have a 3.5 RE setup, and really it was sitting at 4.5 and they were too long. I was told it cant hurt anything, but if I were to flex it and try tucking any of the tire its going to cause problems. However, i will be removing them anyway why on the trails, but I should have adjustables before my first trail weekend anyway. just not sure whats decent for the money.

just cut them down and shorten then a little bit...

just did a quick search and found skyjacker ones for $111. and they are for a 3-4" lift. on quadratech.com