Vibration question

Reply Subscribe

Thread Tools

Search this Thread

Dec 22, 2012 | 09:57 AM

#16

Bustedback

CF Veteran

Joined: Feb 2010

Posts: 12,367

Likes: 23

From: Oroville, CA

Year: 1995

Model: Grand Cherokee

Engine: 4.0 with all of the noise and clatter

Quote:

Originally Posted by ColoradoCorey

ok just from looking at the DL angle it seems you need to shim your axel up. It looks like the pinon is pointing straight forward with the T-case alot higher.

This^. You want the ujoint angles to be almost the same at both ends of the shaft.

Dec 22, 2012 | 04:02 PM

#17

lostbuckaroo

Thread Starter

Member

Joined: Nov 2011

Posts: 225

Likes: 0

From: Northern, California

Year: 1998

Model: Cherokee

Engine: 4.0L

Ok so a TC drop or shims next? I just did both rear u joints made a little difference for the better but the vibes are still there.. I think I'll do the shims.. I don't really like the idea of dropping the TC down... What poor design by the way! If I had the cash I'd just do an SYE and new drive shaft. But low $ fixes will have to do for now.

Thanks guys!