Transgo shift kit in AW4
#1
Newbie
Thread Starter
Join Date: Jun 2016
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Transgo shift kit in AW4
Hey guys,
I just bought the Reprogramming kit for my AW4 from Transgo.
http://www.transgo.com/products.php?...dcountview=Yes
There are two possible mod options on it, one is Hot Rod and the second one is Trucks. I'm not an english native, can anyone help to decide which mod I should choose to my Jeep ? what actually is difference between those mods ? I'm willing to make Hot Rods as I guess it will shift quicker but I'm not sure, there is no way back to Trucks mod then.
Many thx in advance.
I just bought the Reprogramming kit for my AW4 from Transgo.
http://www.transgo.com/products.php?...dcountview=Yes
There are two possible mod options on it, one is Hot Rod and the second one is Trucks. I'm not an english native, can anyone help to decide which mod I should choose to my Jeep ? what actually is difference between those mods ? I'm willing to make Hot Rods as I guess it will shift quicker but I'm not sure, there is no way back to Trucks mod then.
Many thx in advance.
Last edited by rgrosiak; 03-11-2017 at 08:48 AM.
#3
CF Veteran
Join Date: Dec 2011
Location: PA KOTUFU!
Posts: 1,777
Likes: 0
Received 16 Likes
on
15 Posts
Year: 1998
Engine: 4.0L 162,000
You want the 'truck' mod setting. We have 2 kits installed.
Hot Rod setting is just that, fast hard shifts. Leave it for the Supra guys with the AW4 and not for the Jeep guys.
Hot Rod setting is just that, fast hard shifts. Leave it for the Supra guys with the AW4 and not for the Jeep guys.
#4
Newbie
Thread Starter
Join Date: Jun 2016
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Thx guys, did you notice significant improvement with truck mod ? worth to install ?
Did you try hot rod mod to compare ? I just don't want to regret installing truck mod
Did you try hot rod mod to compare ? I just don't want to regret installing truck mod
#5
Newbie
Thread Starter
Join Date: Jun 2016
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
CobraMarty, could you also help me with one page from the installation manual ? Assuming I'm going to make "truck" mod I should skip only section I marked below or just a full page ?
Trending Topics
#8
CF Veteran
Join Date: Mar 2010
Location: Broward County Fl.
Posts: 47,923
Likes: 0
Received 22 Likes
on
22 Posts
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
Me I would not alter kits install one bit . Parts supplied are meant to be used as supplied might downgrade its affect.
#9
CF Veteran
Join Date: Dec 2011
Location: PA KOTUFU!
Posts: 1,777
Likes: 0
Received 16 Likes
on
15 Posts
Year: 1998
Engine: 4.0L 162,000
The instruction sheets have both 'Truck' and 'Hot Rods' on the same pages. You need to do one or the other.
Make sure you are following the right VB type instructions. I highlighted the ones (Truck) I wanted and scratched out the ones (Hot Rods) I didn't. Don't mix.
Mine were done several years ago. I don't remember all the details.
Make sure you are following the right VB type instructions. I highlighted the ones (Truck) I wanted and scratched out the ones (Hot Rods) I didn't. Don't mix.
Mine were done several years ago. I don't remember all the details.