Jeep Cherokee Forum

Jeep Cherokee Forum (https://www.cherokeeforum.com/)
-   Modified XJ Cherokee Tech (https://www.cherokeeforum.com/f67/)
-   -   Transfer case help (https://www.cherokeeforum.com/f67/transfer-case-help-192386/)

GAcherokeeBUILD 04-20-2014 06:36 PM

Transfer case help
 
So I'm a newb to the forums and xjs but no newb to vehicles. Just bought my 1996 xj about 2 months ago and I have been selling toys and stuff to rack up parts. Anyway I bought it with a 4.5 lift of crap. It was a 2.5 lift I think and they shoved blocks in for more. We'll seeing the control arm bushings and track bar are shot out I'm just replacing it all with a 6.5 long arm, sye, cv drive shaft. Trying to purchase now. But, confused on transfer cases....I do not have selec trac lever or panel but on my transfer case it's a 242 j?? The linkage will not reach to the lever also. Just wondering if they made one without selec trac or some one threw this in there not knowing? Only 100k on the jeep. Should I get a 231 and trash the 242 or is it not as bad as everyone is saying. Sorry for ranting. Thanks for the help

XJwonders 04-20-2014 07:35 PM

Get a 231. More aftermarket support.

GAcherokeeBUILD 04-20-2014 08:02 PM

Will any 231 fit?? So if I don't have the part time /full time lever on console and the linkage don't reach...then more than likely came with a 231?? What do I need to lookout for ?Spline counts/electrical/vacuum connections. Also what about shaft lengths?? I plan on a sye just trying to figure this out... Thanks also does anyone have a 231 case laying around?? I need to figure this out:wallbash:

XJwonders 04-20-2014 08:04 PM


Originally Posted by GAcherokeeBUILD (Post 2837697)
Will any 231 fit?? So if I don't have the part time /full time lever on console and the linkage don't reach...then more than likely came with a 231?? What do I need to lookout for ?Spline counts/electrical/vacuum connections. Also what about shaft lengths?? I plan on a sye just trying to figure this out... Thanks also does anyone have a 231 case laying around?? I need to figure this out:wallbash:

where are u located. I have a 231 freshly rebuilt with a SYE and a new chain.

GAcherokeeBUILD 04-20-2014 08:10 PM

North georgia.

xjmarc 04-20-2014 08:13 PM

231s prior to 91 are 21 spline and 91 and later are 23 spline. The YJ and TJ versions are clocked a little different and the ZJ and WJ versions use different spline lengths. Just find one out of an XJ and you should be good. The 242s aren't bad just don't quite the aftermarket support. The shifter is the same just the bezel is different.

GAcherokeeBUILD 04-20-2014 08:16 PM


Originally Posted by XJwonders (Post 2837701)
where are u located. I have a 231 freshly rebuilt with a SYE and a new chain.



Would you ship??? How much you wanting?

xjmarc 04-20-2014 08:22 PM

You have 3 pull a parts in Atlanta that sell them cheap. Or get on GATR (Georgia Trail Riders) forum and I'm sure half a dozen people have them. Southern Jeeps is another option in North GA. I'm just a little North of you in Chattanooga so I know a lot of folks in those clubs.

andrewmp6 04-21-2014 01:19 AM

Yeah as a off roader a 231 is better as a daily driver more street job the 242 is better.


All times are GMT -5. The time now is 03:46 PM.


© 2024 MH Sub I, LLC dba Internet Brands