track bar bushing replacement
#1
Seasoned Member
Thread Starter
Join Date: May 2010
Location: Ypsilanti, MI
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
track bar bushing replacement
I was wondering while i'm replacing the bushings on my track bar, do i need to ratchet strap something to take the tension off of the track bar? i have a 3 inch skyjacker lift on my XJ. thanks in advance
#2
Member
Join Date: Feb 2012
Location: West TN
Posts: 227
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
No, just have someone turn the wheel for you while you take the bolt out to take the tension off the bolt..I would also drill the new track bar bushing and mount to 7/16" and use a grade 8 bolt, Same thing putting it back in.
#3
Seasoned Member
Thread Starter
Join Date: May 2010
Location: Ypsilanti, MI
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
#4
Seasoned Member
Thread Starter
Join Date: May 2010
Location: Ypsilanti, MI
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
ok i have one last question....there is a large poping sound now coming from drivers side under my feet. Could it be that i didn't tighten the track bar enough at the frame end? thanks again
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)