Thinking bout regearing to 4.10 on 31's it is my DD. What are you thoughts?

 

Do it! I did, one of the best upgrades I have done.

 

how's it on the highway?

 

you're gonna kick yourself if you decide to make the jump to 33's

 

why so?

 

because with the auto trans you'll have wanted the 4.56's
I'd spend my money on getting a little more flex and some bigger tires before I regeared a low pinion dana 30 but thats just me
regear aint cheap unless you know a guy. you only wanna do it once

 

Well i'm most likely gonna stay with 31's

 

have you added up the total cost yet? if you can do it yourself I say go for it

 

I believe around 450 for gears?

 

that'll get you 2 ring and pinion sets
then install kits are $100 each
new carrier is $90
and install can be up to $300 an axle
and you might as well throw a locker in there while you're digging around. $350

total: $1300 without a locker
that's why my advice is go big or save your money
but then again, I dont know you. maybe you're up for it

 

ya idk. I'm playing with the idea and researching what i can do.

 

If you're positive you wont go bigger in the near future then go with 4.10s.

 

I wouldnt do it for 31s. Not necssary in my opinion. And , Yeah, a lot of us were at one point positively sure we would stay with 31s. . So you really want to make sure you do it once.

 

I'm getting ready to run 31's with my stock 3.55.

 

GF has JK 32's on regular 3.55's, i dont think theres a problem with it and she DD's it.