Tapered reamer for 1 ton - Loaner anyone?
03-16-2017, 05:48 PM
#1
Junior Member
Thread Starter
Join Date: Sep 2016
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Tapered reamer for 1 ton - Loaner anyone?
Like the title says. Don't want to spend $70 on the tool to use once. If someone wants to mail it ill mail it back when done and pay shipping both ways through paypal. Shouldn't be more than a couple bucks.
03-17-2017, 12:35 AM
#2
::CF Administrator::
Unless you're really tight with some people here, I wouldn't expect much of a response.
If that's the case, just buy the reamer, and sell it on ebay or CL to recoup some of the cost. Or keep it. $70 isn't that terrible...
If that's the case, just buy the reamer, and sell it on ebay or CL to recoup some of the cost. Or keep it. $70 isn't that terrible...
03-17-2017, 12:48 AM
#4
::CF Administrator::
I don't recommend that, the inserts wear out and get sloppy over time. Do it the right way.
03-17-2017, 04:29 AM
#5
CF Veteran
Join Date: Apr 2016
Location: Pasquotank, NC
Posts: 1,679
Likes: 0
Received 15 Likes
on
13 Posts
Year: 1990
Model: Cherokee
Engine: 4.0
Being a wear item, I doubt many folks are going to blindly lend a reamer out. It's fairly easy to FUBAR one. BUT, if someone does want to lend one out, throw me on that list.
03-17-2017, 06:30 AM
#6
Junior Member
Thread Starter
Join Date: Sep 2016
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Well i bought inserts already...am i able to ream after drilling 7/8 for the insert? Use inserts til they wear out? I have a drill press and plan on removing parts to ream if that helps anyone to lend me it!
03-17-2017, 09:41 AM
#7
::CF Administrator::
Have you drilled anything out yet? If not, then just drill and ream for non-insert setup, and toss those things...lol
Last edited by Rogue4x4; 03-17-2017 at 10:35 AM.
