So I finally had time to remove my tcase drop brackets because I have a sye now. Once the bracket is removed I can't put the shorter bolts in to bolt the cross member. The holes don't seem to line up. I put the drop brackets back in with the longer bolts and it lines up fine. I donno what the prob is if anyone has seen this let me know because I got to get new motor mounts in before winter.

 

Fix

 

Or, loosed the nuts for the trans mount and move the crossmember to where you like then tighten the nuts.

 

tryed everything something is bent or flexing on the lift i donno

 

Both the above posts should take care of it, you may need to loosen the motor mounts also.