Modified XJ Cherokee Tech XJ (84-01)
All modified tech questions. If it modifies your XJ beyond stock parts ask it here.
Sponsored by:
Sponsored by:

strange noise

Thread Tools
 
Search this Thread
 
Old Sep 7, 2014 | 11:12 AM
  #1  
Markjl's Avatar
Thread Starter
Newbie
 
Joined: Nov 2013
Posts: 6
Likes: 0
From: S. Wisconsin
Year: 96
Model: Cherokee
Engine: 4.0 H.O.
Default strange noise

I have a 96 xj with a 3 in lift. recently I have been hearing clunking sounds usually when going in or out inclined driveway or large bump more so when turning or at a angle. The sound is similar too what you might hear with a broken sway bar. I have checked rear sways, wheels, all the hardware far has shackles, u bolts, shocks, pertaining too the lift I installed. It was installed over a year ago with out problems till just now. the sound seems too be coming from mid too center rear of the jeep. Is it possible it could be coming from something inside the differential? Any help here would be appreciated. Thanks.
Reply
Old Sep 7, 2014 | 12:19 PM
  #2  
Sizemic2's Avatar
Junior Member
 
Joined: Apr 2013
Posts: 68
Likes: 0
From: TX
Year: 2001
Model: Cherokee
Engine: 4.0
Default

Check the bushings on your lower control arms for wear/play. I had the same symptoms and I thought it was coming from the back too.
Reply
Old Sep 7, 2014 | 09:31 PM
  #3  
burg3rlicious's Avatar
Seasoned Member
 
Joined: Aug 2013
Posts: 405
Likes: 0
From: Connecticut
Year: 1998
Model: Cherokee
Engine: I6 4.0
Default

Bushings, ballpoint? u joints maybe? Is it when you shift?
Reply
Old Sep 8, 2014 | 11:17 AM
  #4  
Markjl's Avatar
Thread Starter
Newbie
 
Joined: Nov 2013
Posts: 6
Likes: 0
From: S. Wisconsin
Year: 96
Model: Cherokee
Engine: 4.0 H.O.
Default upper control arm

I thought LCR's too but those have been replaced. Iam gonna check uppers though next. those are original. I dont think ball joints or u joints I can check those too, but its only when the body seems too move say going in and out driveways etc.

Last edited by Markjl; Sep 8, 2014 at 11:19 AM.
Reply
Old Sep 8, 2014 | 11:42 AM
  #5  
iweb's Avatar
Member
 
Joined: Aug 2009
Posts: 183
Likes: 0
Model: Cherokee
Default

My motor and tranny mounts plus CA bushings were all bad and I had that noise. Not sure which one fixed it but good now.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
LittleRed94
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
Oct 6, 2015 08:09 PM
Freakn
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
52
Oct 4, 2015 06:34 AM
Lightning_19k
Modified XJ Cherokee Tech
14
Oct 3, 2015 09:52 PM
redrooster
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
Oct 2, 2015 12:35 AM
Voyager2
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
Sep 28, 2015 04:23 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 11:22 PM.