So I replaced my steering box with a remained unit. I jacked up the jeep and bled the system a number of times. Steering is now stiff and the steering doesn't return straight when I turn. I adjusted the nut on top to try and make it a little bit looser, but no matter how much I adjust it, it doesn't change. I have 3/4 heim steering, but it wasnt stiff with my other box. Any help would be appreciated

 

sounds like the worm and sector needs adjusting. Crack the jam but Loose and turn the screw a turn and try again. It's just a trial and error until it feels right and returns to center.

 

That's what I adjusted. Half a turn out so far. Didn't change at all. Maybe ill play with it a little more. Its dark out but I got a trail run in the morning. Thanks for the input

 

bad box maybe?

 

That's what I was thinking. Came from autozone. I just adjusted it, tested it, adjusted, tested, and im a full turn and a half out. No change. Guess ill get up early and swap it out before my run