Rubicon Express RE1600 at 3"??
#1
Junior Member
Thread Starter
Join Date: Dec 2011
Location: State College, PA
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0 I6
Rubicon Express RE1600 at 3"??
Looking to upgrade my track bar to the RE1600.. I'm at 3" of lift and the track bar is advertised to fit 3.5"-4.5".. does anyone have experience running this track bar at 3"? Also open to suggestions for other track bars that would work well at 3".
#2
CF Veteran
Join Date: Nov 2011
Location: SLC, Utah
Posts: 3,603
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L
Originally Posted by gregb091
Looking to upgrade my track bar to the RE1600.. I'm at 3" of lift and the track bar is advertised to fit 3.5"-4.5".. does anyone have experience running this track bar at 3"? Also open to suggestions for other track bars that would work well at 3".
#3
CF Veteran
Join Date: Feb 2010
Location: La Habra, CA
Posts: 1,152
Likes: 0
Received 1 Like
on
1 Post
Year: 1988
Engine: 4.0 RENIX
its just a half an inch of difference, it will work fine.
i run a re1660 which is rated for 4.5" and above on my 3" lift and it just pushes the axle a little more to the passenger side. not a big deal really.
i run a re1660 which is rated for 4.5" and above on my 3" lift and it just pushes the axle a little more to the passenger side. not a big deal really.
Thread
Thread Starter
Forum
Replies
Last Post
rdr8887
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
11
01-27-2020 09:24 AM
Jooman07
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-21-2015 12:13 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)