Jeep Cherokee Forum

Jeep Cherokee Forum (https://www.cherokeeforum.com/)
-   Modified XJ Cherokee Tech (https://www.cherokeeforum.com/f67/)
-   -   Rubicon Express AAL 2.5'' question.. (https://www.cherokeeforum.com/f67/rubicon-express-aal-2-5-question-244215/)

Martlor13 05-08-2018 05:10 PM


Originally Posted by LadyKenai (Post 3488663)
this time the mailman comes and its empty again i can feel it without opening it should weigh 22 pounds if its empty again i will NOT accept the package and he can take it with him and report back to whom ever he got it from

marc

edit: i thought its a fair price 40 bucks per leaf idk seems fair to me

is be done with that. Get your refund and find a new seller......if its 76 for the pair thats not bad. The title and description imply its one aal when you read it.

LadyKenai 05-08-2018 05:14 PM

Rubicon Express RE1410 2.5" Add-A-Leaf for Jeep XJ - Pair



a pair is 2 :)

LadyKenai 05-08-2018 05:18 PM

the note in the order says: Pair

Martlor13 05-08-2018 05:21 PM


Originally Posted by LadyKenai (Post 3488670)
Rubicon Express RE1410 2.5" Add-A-Leaf for Jeep XJ - Pair



a pair is 2 :)

Maybe my phone is cutting some words out because the title ends at jeep lol

LadyKenai 05-08-2018 05:23 PM

yeah thanks you had me worried there for a second its been stressful enough already haha

LadyKenai 05-09-2018 09:06 PM

yaaaaaaaaaaay they came in finally..
now get to work :D

marc

edit: nice arches perfectly even with each other out of the box

LadyKenai 05-24-2018 04:58 PM

well to finish this thread up,


it is doable to leave the main leaf spring on bolted to the jeep and drop the axle low enough to add the leaf one side at the time, passenger side went ok hand brake cable was a bit in the way cause of the muffler but just enough stretch to work around it. the drivers side i had to take the clip out of the brake line bracket where hard meets the soft line to get more flex and gave me a few more inches of drop.


ive used 3 small c-clamps to pack the leafs together with the center pin inserted and placed the pack on the axle with the center pin aligned in the axle hole and started to jack the axle back up aligning everyting together bit by bit slowly. once the center pin is almost completely through the hole in the main leaf spring i switched the c-clamps one at the time to pack the whole leaf pack together with the main leaf that was still attached and tighten everything back up.


marc


i'll get a picture up soon


edit: of course i put the clip back in the brake line bracket after and also i added another spring hooked to the sway bar hinge that pulls the hand brake cable away up higher from the muffler cause that was touching and started to melt a little.

LadyKenai 05-24-2018 09:51 PM

here a picture of the rear lift 2.5'' rubicon express full add-a-leaf with 15x8'' baja rims on 32's

im still working on the front flares its coming together need some more time :)



marc


https://cimg6.ibsrv.net/gimg/www.che...303a9e4801.jpg


All times are GMT -5. The time now is 09:46 AM.


© 2024 MH Sub I, LLC dba Internet Brands