routing a wiring harness
#1
Junior Member
Thread Starter
Join Date: Dec 2016
Location: Birmingham
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0L
routing a wiring harness
hey guys, getting a 50" light bar soon and i already have 2 4" pods. i have a truck that has multiple lights on and i ran my wires through my firewall. was wondering if there was any way that i could run the switch wiring through the firewall on my 01' cherokee. any advice would be great. thanks
#2
Senior Member
Join Date: Jul 2015
Location: Southern Maryland
Posts: 563
Likes: 0
Received 2 Likes
on
1 Post
Year: 1993
Engine: 4.0
There's a hole with a rubber grommet on the driver's side of the firewall, to the right of the brake booster, if I remember correctly it holds the hood release cable, I've fished wires through that before on my 96 I imagine there should be something similar on your 01.
#3
CF Veteran
Join Date: Oct 2015
Posts: 7,357
Likes: 0
Received 1,530 Likes
on
1,173 Posts
Year: 2000
Model: Cherokee (XJ)
I wired factory fogs in an '00 that did not come with them. To the right of the power brake booster is a metal disc. I drilled a 1/2" hole in there to come through with the wire wrapped in split loom. Plenty of room to drill from the engine compartment.