HARSH

 

What in the butt**** did you do? Beat it with a hammer? LOL

 

Nope, just driving around

 

You bent the bottom sway bar endlink bracket just driving around?

 

rough country at its finest!

 

Do you see the part where the bracket is bent to ****?

 

I sure as hell do... I had a similar problem on my wrangler from a Black Diamond lift, but it was just the sway-bar link... There is no reason the bracket should bend unless it is beat on now, was possibly beat hardcore by the PO and he sledged it back, or the weld is rusted through. That is ridiculous. lol

 

I did a small bit of wheeling , but this shouldn't happen though , I mean they're supposed to flex right ? Not just bend

 

No. Your supposed to disconnect those links before wheeling, I do believe.

 

No, the OEM bracket they are tied to is all bent to ****. Something happened to cause that to bend. Which forced the endlinks to bend to accommodate.

 

The sway bar got bound up, something got wedged between it and the frame and held the bar while the diff compressed bending the link. Did the upper link mount get caught on the rail someplace?

 

Yup, can't blame the sway bar link for that... Something else happened first!!

 

I don't know how it happened, was wondering if anyone has seen it before

 

post a pic of tha other side if u dont mind

 

Looks to me like you stuffed that wheel and the link and sway bar hit the inner fender! Do you have a dent and or hole above the link?