Originally Posted by 1998redxj (Post 2306184)

If u are talking about the sound bar speakers in the rear and u wanna replace them i just did mine today with brand new 6.5 inch kenwoods and took me a whole wopping ten minutes to remove and replace both. Its very easy. All u wiuld need is an aftermarket harness that i found on ebay for a few bucks for a pair. Type this in on ebay if that is what you use. "Speaker Wire Harness Adapter for jeep cherokee" u will need that adapter plug to replace any stock speakers with aftermarket. Its all plug and play.

Originally Posted by Cherokeekid4x4 (Post 2306198)

How do you take them out of the sound at?

Originally Posted by 1998redxj (Post 2306217)

U mean the sound bar? If yours have grill covers over the speakers then pop them off with a flat head screw driver and you will see screws holding the speakers in. Just unscrew them and the speaker will come out. Luckily for me i didnt have to remove a speaker cover so i just unscrewed the old ones and installed the new ones. The stock speaker covers have i believe 3 clips u gotta push in with a flat wad screw driver to get the grill cover off. If not u can always pull hard enough and it should pop off.

Originally Posted by Cherokeekid4x4 (Post 2306261)

Yeah sorry and cool thanks!