rear shock mounts
#1
Member
Thread Starter
Join Date: Jul 2010
Location: Steubenjeepville, OH
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
rear shock mounts
Guys, I've run into a bit of a problem. Broken bolts on my upper rear shock mounts. Tried welding on bolts...didn't hold. I saw a thread somewhere that used a small piece of channel on both sides bolted through the floor. ( can't seem to find the thread)
I have an RE 3.5 kit on now...what would be the best solution for this? I don't think fishing in new bolts is what I'm looking for. Is there a good home built or after market fix you guys have used and would recommend?
Thanks for the help.
I have an RE 3.5 kit on now...what would be the best solution for this? I don't think fishing in new bolts is what I'm looking for. Is there a good home built or after market fix you guys have used and would recommend?
Thanks for the help.
#2
CF Veteran
Join Date: Sep 2009
Location: Grand Prairie, Texas
Posts: 1,142
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1998
Model: Cherokee
Engine: 4.0 HO I6
If you can weld, then just grab some rear sway bar mounts and weld them up in there for bar pin eliminators. Otherwise, knocking the weld nuts out and fishing new bolts down is really easy....it took me 30 minutes to do both sides, tops.
#4
Seasoned Member
Join Date: Mar 2010
Location: Santa Clarita,CA
Posts: 497
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000 Sport
Model: Cherokee
Engine: I6 4.0
Guys, I've run into a bit of a problem. Broken bolts on my upper rear shock mounts. Tried welding on bolts...didn't hold. I saw a thread somewhere that used a small piece of channel on both sides bolted through the floor. ( can't seem to find the thread)
I have an RE 3.5 kit on now...what would be the best solution for this? I don't think fishing in new bolts is what I'm looking for. Is there a good home built or after market fix you guys have used and would recommend?
Thanks for the help.
I have an RE 3.5 kit on now...what would be the best solution for this? I don't think fishing in new bolts is what I'm looking for. Is there a good home built or after market fix you guys have used and would recommend?
Thanks for the help.
http://jeephorizons.com/tech/xjshock.html
Last edited by bigboy813; 02-08-2011 at 10:41 PM.
#6
CF Veteran
Join Date: Oct 2009
Location: Northeast CT
Posts: 1,640
Likes: 0
Received 0 Likes
on
0 Posts
Year: 99
Model: Cherokee
Engine: 4.0
this is what i did. by far the EASIEST solution
Thread
Thread Starter
Forum
Replies
Last Post
RickJames Bish
Modified XJ Cherokee Tech
5
09-02-2015 03:22 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)