re-gearing and locker question
Thread Starter
Senior Member
Joined: Jun 2010
Posts: 703
Likes: 4
Year: 1993
Model: Cherokee
Engine: 4.0
re-gearing and locker question
Im wanting to re-gear to 4.56's soon. And I currently have a lunchbox locker in my jeep.
Just wondering with the 4.56's if there is still enough clearance to slide the diff pin in and out?
Just wondering with the 4.56's if there is still enough clearance to slide the diff pin in and out?
Former Sponsor
Joined: May 2010
Posts: 2,181
Likes: 0
From: meriden Ct
Year: 2000
Model: Cherokee
Engine: 4.0
I'm assuming your talking about the rear. I'm not positive with the d35 but on the 8.25 you will have to notch the ring gear.
If your talking about the front, you can not remove the pin either. You will have to assemble the carrier then put the ring gear on.
If your talking about the front, you can not remove the pin either. You will have to assemble the carrier then put the ring gear on.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)