quick question here
#1
Senior Member
Thread Starter
Join Date: Sep 2011
Location: Burington Washington
Posts: 972
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4L Renix
quick question here
i have a 89 Cherokee 4.0 5speed currently has 3.07's i believe.
i am wanting to go to a 4:10 ratio. with 33's any one know what the rmp is at 60mph with this combo?
as i am new to jeep i am having a bit of a time with the search, im not up to date on my key words yet
i have a line on some 4 cyl jeep axles from a Cherokee and i just want to make sure there a good swap and wont have me turning 3krpm on the free way.
if my guesstimate is right should put me some ware between 2200 -2500.
also if some one has the time could bestow upon me some good tag words as far as running gear. i'll use the search more
i am wanting to go to a 4:10 ratio. with 33's any one know what the rmp is at 60mph with this combo?
as i am new to jeep i am having a bit of a time with the search, im not up to date on my key words yet
i have a line on some 4 cyl jeep axles from a Cherokee and i just want to make sure there a good swap and wont have me turning 3krpm on the free way.
if my guesstimate is right should put me some ware between 2200 -2500.
also if some one has the time could bestow upon me some good tag words as far as running gear. i'll use the search more
#2
Seasoned Member
Join Date: May 2010
Location: Dillsburg, PA
Posts: 320
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: I6
According to the calculator here: http://www.4lo.com/4LoCalc.htm, you will be spinning 1977 rpm at 60 mph. I thought that this number was a little low, but my hand calculation yielded the same value. I did the same swap, but i am running 31s and have an AW-4 auto. It is a great combo and i am planning on going up to 33s. I am convinced that the gearing with 33s will be acceptable for me. Hope this is helpful. As for the search keywords, i will be of no help...haven't used the search function very much...good luck.
#3
CF Veteran
Join Date: Feb 2010
Location: Missoula, MT
Posts: 3,353
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee
Engine: Golen 4.6 Stroker, AFE Headers, 62mm TB, 24 LB Injectors, Brown Dog kit, HF Cat, 3" Exhaust
I have 4.10s and with my 34x10.5s, i was getting 22/24 mpg when I drove down from MT (to louisiana)... my jeep only had 20k on it and I added alot of stuff (borla exhaust, TB spacer, K&N, bigger radiator etc.) and even now with my 35 x12s, with the 4.10s 70 is around 2000 on the highway
that being said I get alot less going up a big hill run around 3000/3500 to keep it going 70
that being said I get alot less going up a big hill run around 3000/3500 to keep it going 70
Last edited by Ianf406; 10-06-2011 at 07:46 AM.
#6
#7
Senior Member
Thread Starter
Join Date: Sep 2011
Location: Burington Washington
Posts: 972
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4L Renix
the link to the gear calc would be handy if i knew the gear ratio of my manual trans and the t-case gear ratio as well.
i shall try another search.......
i shall try another search.......
Trending Topics
#8
Seasoned Member
Join Date: May 2010
Location: Dillsburg, PA
Posts: 320
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: I6
#9
#11
CF Veteran
Join Date: Jan 2011
Location: BELLINGHAM W.A.
Posts: 3,228
Likes: 0
Received 1 Like
on
1 Post
Year: 1993
Model: Cherokee
Engine: 4.0
According to the calculator here: http://www.4lo.com/4LoCalc.htm, you will be spinning 1977 rpm at 60 mph. I thought that this number was a little low, but my hand calculation yielded the same value. I did the same swap, but i am running 31s and have an AW-4 auto. It is a great combo and i am planning on going up to 33s. I am convinced that the gearing with 33s will be acceptable for me. Hope this is helpful. As for the search keywords, i will be of no help...haven't used the search function very much...good luck.
#12
CF Veteran
Join Date: Feb 2010
Location: Cove, OR
Posts: 2,095
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1993
Model: Cherokee
Engine: 4.0
60x4.10x336x.79/33= 1979 rpms
If your 33s are actually 33 inches tall, most are around 32.6-32.8 inches.
#13
Senior Member
Thread Starter
Join Date: Sep 2011
Location: Burington Washington
Posts: 972
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4L Renix
thank you. i think that rpm would be better. i turn 1200 at 55 in 5th right now.
so looks like a axle swap is in order.
much thanks
Thread
Thread Starter
Forum
Replies
Last Post
Sandyman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-10-2015 09:21 AM
daddytuck
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-07-2015 08:16 PM
daddytuck
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-07-2015 07:50 PM
daddytuck
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-07-2015 05:51 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)