Post 3inch vibes
#1
Newbie
Thread Starter
Join Date: Jul 2012
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Post 3inch vibes
so I just put my new rc 3 inch add a leaf in with the lcas. I was expecting vibes so now I just need to know how to get rid of them. I put 2 degree wedges on the read axes to angle the yoke up. That helped a little so the i lowered the transfer case about 1/4 of an inch and there is still some vibes between 20-30mph and also at high speeds (55-65). Should I buy a tc drop? If so how big. And should I angle the rear end another 2 degrees? Any suggestions? Thanks, chris
#3
CF Veteran
Join Date: Apr 2008
Location: Smiths Station, Al
Posts: 7,661
Likes: 0
Received 13 Likes
on
10 Posts
Year: 87
Model: Wagoneer
Engine: 4.0 I6
Inch drops suck for clearance. I nice solution i just picked up is the rusty's drop x member. Built in drop but you lose no clearance. Its beefier than stock.
Then there is hack n tap with a front driveshaft. Still cheaper than a full blown sye.
Last ofcourse is a sye with new driveshaft. Big money but def no more worrys.
Shimming you axle is great also. 4 degrees should be what you need but no true way to tell unless you measure.
Then there is hack n tap with a front driveshaft. Still cheaper than a full blown sye.
Last ofcourse is a sye with new driveshaft. Big money but def no more worrys.
Shimming you axle is great also. 4 degrees should be what you need but no true way to tell unless you measure.
#4
Thread
Thread Starter
Forum
Replies
Last Post
Kydude7
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
7
09-20-2015 06:35 AM
Carlisle
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-06-2015 08:21 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)