alright im pieceing together a lift ... Im going to include the parts im getting ...i need to yall to look over it and tell me what i dont need and what i need to add to it.. Thanks for your alls help in advanced ..

IRO critical path long arms
IRO double sheer track bar kit
IRO extended length brake lines
Rubicon express front coil springs 5.5 lift height
Rubicon express u-bolt kit for chrysler 8.25
Rubicon express 4.5 lift heigth leaf springs
3/8 center pins for rubicon express leafs
Rubicon express 1.5 lift height boomerang shackles
Jks sway bar disconects

 

What are these? My leafs had center pins already installed and they were more closer to 1/2".

3/8 center pins for rubicon express leafs

 

Looks good to me. I'm piecing together a 6.5'' kit. I made a post in my thread and had some good responses. On the second page on, the more recent, helpful info is posted.
https://www.cherokeeforum.com/f67/budget-boost-129077/

But that looks good.

 

you need an sye, look into IRO hack N tap

 

that IRO critical path long arm kit is garbage, the redesigned the wheel on that one. that thing is scary

 

Well i guess i can take the 3/8 center pins off the list and what long arms wouks yall recomend

 

SERIOUS, Clayton, or Rock Krawler.

 

Ok thanks

 

Also where is the best place to purchase these parts

 

 

https://www.cherokeeforum.com/f10/ru...avings-147436/

 

I don't disagree but there's a factor of almost 2x for the price as well.

 

When/If I upgrade to longarms, I'm going with Ironman4x4fab

 

Tge ironman4x4 fab ones dont come with a cross member to mount them too or did i miss it on their web site

 

How much is your kit going to cost you? I deciding whether it would be cheaper to build my own kit or just buy one.