|
np229 output shaft swap into np231?
I see alot of the SYE conversion kits for the np231 use a larger 32 spline output shaft. I swapped my np229 with a np231 and now want to do a SYE. The old np229 already has a fixed yolk and a larger 32 spine output shaft. Can I use the 32 spline output shaft and yolk out of the np229 in the np231? I can't find any info on this. It seems the np229 is rarely used and there's just not alot of info out there about this tcase. That would be great it I could just swap the output shaft of these tcases and have a HD SYE on my np231.
|
Originally Posted by cmarr6
(Post 3248504)
I see alot of the SYE conversion kits for the np231 use a larger 32 spline output shaft. I swapped my np229 with a np231 and now want to do a SYE. The old np229 already has a fixed yolk and a larger 32 spine output shaft. Can I use the 32 spline output shaft and yolk out of the np229 in the np231? I can't find any info on this. It seems the np229 is rarely used and there's just not alot of info out there about this tcase. That would be great it I could just swap the output shaft of these tcases and have a HD SYE on my np231.
|
I don't have a 231 to compare it to. Mine is in the Jeep and I don't want to have to take it out if it can't be done.
|
Originally Posted by cmarr6
(Post 3248572)
I don't have a 231 to compare it to. Mine is in the Jeep and I don't want to have to take it out if it can't be done.
|
I PMed you. Thanks
|
Originally Posted by cmarr6
(Post 3249018)
I PMed you. Thanks
|
I PMed again.
|
Originally Posted by cmarr6
(Post 3249032)
I PMed again.
|
Shipped the shaft to you yesterday.
|
| All times are GMT -5. The time now is 04:58 PM. |
© 2024 MH Sub I, LLC dba Internet Brands