Need some input on new SYE dshaft angle
11-12-2012, 11:17 PM
#1
Member
Thread Starter
Join Date: Feb 2010
Location: Calgary, Canada
Posts: 103
Likes: 0
Received 1 Like
on
1 Post
Model: Cherokee
Need some input on new SYE dshaft angle
Hey guys, I just finished putting a SYE into my '98 xj. I pulled this Tcase, sye and driveshaft out of a parts truck a while ago and finally got around to putting it in and taking out my old Tcase drop.
But now that I've got it in the angle at the double-cardan looks a little sharp...what do you guys think?? It has maybe 3mm of clearance at the Dshaft ears right now but it looks like it might bind when I get it flexed out on the trail...
I'm at about 6.5" of lift, the 231/sye/dshaft came out of an xj with 4.5" lift.
Here's some pics..
But now that I've got it in the angle at the double-cardan looks a little sharp...what do you guys think?? It has maybe 3mm of clearance at the Dshaft ears right now but it looks like it might bind when I get it flexed out on the trail...
I'm at about 6.5" of lift, the 231/sye/dshaft came out of an xj with 4.5" lift.
Here's some pics..
11-13-2012, 08:18 AM
#3
Member
Thread Starter
Join Date: Feb 2010
Location: Calgary, Canada
Posts: 103
Likes: 0
Received 1 Like
on
1 Post
Model: Cherokee
Yea the small blocks I have under my leafs have a built in shim, I havent been able to drive it yet as I am still getting everything bolted back in... (I had to pull the tranny as well to do a pump seal and am replacing a bunch of other stuff while Im at it..)
Thread
Thread Starter
Forum
Replies
Last Post
shelby5041
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
07-20-2016 04:38 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)