Driftunit

My stinger mounts in the ideal spot for my lights. so now i need to find a way to orient them. i think inside the stinger might be to close but im afraid outside of the stinger or mounted to it wont look right.

Can someone photoshop me some light ideas please, i will not be putting them on the roof

heres what im workin with

JerrytheJeep

Did you make that bumper yourself? If you wouldn't mind drilling holes in it you could make a light bar for the area in-between your stinger. I'd run some lag bolts through it with a threaded bar and some heim joints so you could adjust it or take it off even.

Driftunit

Yep i made it. i didnt really make it with lights in mind but came up with a set in some trading so i figured why not lol.

The thing about putting them inside the stinger is they will be almost touching close. the lights them selves are about 5 inches wide a piece. they have to be mounted even closer to the center so im not touching against the stinger. if i do that im afraid it will look bad cause they will be right up against each other

Bbasso

odgreen

Here to help. These are 7in lights.

Driftunit

im thinking ill prob end up with something like that only low enough to where they are below my head lights. my stinger sticks out pretty far so the higher i go the further away the hellas would be from the jeep. you can get an idea from pic 3 i posted

Driftunit

Didnt see this before i posted. those look good!

odgreen

Here is a clear pic lol I think I might of been falling over when I took that first pic.

Driftunit

Well odgreen youve changed my mind. im going to try to mount mine on the inside of the stinger. your bar is mounted a little wider than mine but i think from the look of yours with the 7s stuck in there i can prob squeeze my 5s in no prob.

Atmos

have you guys seen the HID's that ruffstuff just started carrying?? they look sweet I actually want some
if you're not dead set on HELLA you should check out these. Dan only carries awesome products. great warranty too
I personally prefer them mounted on the A pillars
http://www.ruffstuffspecialties.com/catalog/4HID.html
http://www.ruffstuffspecialties.com/catalog/7HID.html

odgreen

Lol glad I could help. You can mount em inside and if you don't like em.... Cut the tabs off and try again! Lol it's just steel.

Driftunit

You have a point there. i made the whole thing thus far, whats a couple tabs lol

odgreen

About 30 minutes........ Ha!

huntingman2706217

detours offroad a pillars...

Lowrange2

I hate when people make little eyebrows on their headlights.

Needs these...