Modified XJ Cherokee Tech XJ (84-01)
All modified tech questions. If it modifies your XJ beyond stock parts ask it here.
Sponsored by:
Sponsored by:

My first post

Thread Tools
 
Search this Thread
 
Old 07-30-2012, 12:38 PM
  #1  
Newbie
Thread Starter
 
Lew 52's Avatar
 
Join Date: Jul 2012
Location: south fl
Posts: 15
Likes: 0
Received 0 Likes on 0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
Default My first post

This week end i am going to install a RE 4.5 lift on my 01 xj , anything special i need , or to look out for besides the rear upper shock bolts..Thanks...Lew
Old 07-30-2012, 12:43 PM
  #2  
CF Veteran
 
sthon's Avatar
 
Join Date: Mar 2011
Location: California
Posts: 2,570
Likes: 0
Received 4 Likes on 4 Posts
Year: 1992
Model: Cherokee
Engine: 4.0 HO
Default

Hi Lew, and welcome to the forum. If you haven't already pick up some PB Blaster and start spraying every bolt/nut you need to remove. With an '01 and a 4.5" lift you are going to need at the very least a TC drop, though you would be better off with a SYE.

If your kit came with full leaf packs take caution when removing the old leafs. The weld nuts like to break free in the unibody, and the bolts like to rust themselves into the bushing sleeves. With an '01 your rust shouldn't be near as bad as my '92 was.
Old 07-30-2012, 12:50 PM
  #3  
CF Veteran
 
RTorrez1's Avatar
 
Join Date: Sep 2011
Location: Riviera, Texas
Posts: 4,172
Likes: 0
Received 4 Likes on 4 Posts
Year: 1998 Sport
Model: Cherokee
Engine: 4.0
Default

Like sthon said make sure to spray down all the nuts and bolts really well with PB Blaster ant least one or two days before you start working on her.
BTW, Welcome to the forum

Last edited by RTorrez1; 07-30-2012 at 01:22 PM.
Old 07-30-2012, 01:01 PM
  #4  
Newbie
Thread Starter
 
Lew 52's Avatar
 
Join Date: Jul 2012
Location: south fl
Posts: 15
Likes: 0
Received 0 Likes on 0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
Default

Thanks ,, i have be spraying the PB blaster , the kit comes with new spring packs , thanks for the tip on the sye , i forgot about that , i will pick on up ...thanks..
Old 08-05-2012, 03:26 PM
  #5  
Newbie
Thread Starter
 
Lew 52's Avatar
 
Join Date: Jul 2012
Location: south fl
Posts: 15
Likes: 0
Received 0 Likes on 0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
Default

Lift update , got the lift on , only a few problems with the rear shock bolts but that is fixed , drives nice but have a fibration in the rear drive train between 20-40 mph , i did the 1 in tc drop but no sye , pinion angle looks ok but i haven't put a gage on it yet , any thoughts ?? thanks ...Lew
Old 08-05-2012, 03:57 PM
  #6  
Senior Member
 
greenxj21's Avatar
 
Join Date: Aug 2012
Posts: 792
Likes: 0
Received 0 Likes on 0 Posts
Default

Pics...
Old 08-10-2012, 05:02 AM
  #7  
Newbie
Thread Starter
 
Lew 52's Avatar
 
Join Date: Jul 2012
Location: south fl
Posts: 15
Likes: 0
Received 0 Likes on 0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
Default

I don't know how to put up pics on this forum yet , but i have a pic in my profile , for the vibration i decided to go with a SYE and CV drive shaft , hope to have it done this week end if the parts come in ....
Old 08-10-2012, 06:05 AM
  #8  
CF Veteran
 
freegdr's Avatar
 
Join Date: Mar 2010
Location: Broward County Fl.
Posts: 47,923
Likes: 0
Received 22 Likes on 22 Posts
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
Default

where in south fl are you ,and to post pics save them to pc then look below where you post message to manage attachments its pretty self explanatory like this
Attached Thumbnails My first post-0511111147a_243742.jpg  
Old 08-10-2012, 07:42 AM
  #9  
THE Admin

 
Outlaw Star's Avatar
 
Join Date: Sep 2010
Location: Lantana, Fl
Posts: 34,036
Received 231 Likes on 187 Posts
Year: 1996
Model: Cherokee (XJ)
Engine: 4.Slow
Default

Welcome to the forum.
Old 08-10-2012, 12:45 PM
  #10  
Newbie
Thread Starter
 
Lew 52's Avatar
 
Join Date: Jul 2012
Location: south fl
Posts: 15
Likes: 0
Received 0 Likes on 0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
Default

freegdr im in boynton beach , thanks outlaw , looks like a good forum...
Old 08-10-2012, 01:29 PM
  #11  
THE Admin

 
Outlaw Star's Avatar
 
Join Date: Sep 2010
Location: Lantana, Fl
Posts: 34,036
Received 231 Likes on 187 Posts
Year: 1996
Model: Cherokee (XJ)
Engine: 4.Slow
Default

Originally Posted by Lew 52
freegdr im in boynton beach , thanks outlaw , looks like a good forum...
You live by me. Lol. Im in Lantana.
Old 08-10-2012, 01:38 PM
  #12  
CF Veteran
 
freegdr's Avatar
 
Join Date: Mar 2010
Location: Broward County Fl.
Posts: 47,923
Likes: 0
Received 22 Likes on 22 Posts
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
Default

Originally Posted by Lew 52
freegdr im in boynton beach , thanks outlaw , looks like a good forum...
It a good group of people up there buy you and welcome to the forum...
Old 08-10-2012, 01:54 PM
  #13  
Newbie
Thread Starter
 
Lew 52's Avatar
 
Join Date: Jul 2012
Location: south fl
Posts: 15
Likes: 0
Received 0 Likes on 0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
Default

Thats cool , where go you guys go 4 wheeling at ?? i know corbett , but i think thats a swamp this time of year with all the rain , i heard there was a place at the end of hypoluxo ??
Old 08-10-2012, 04:52 PM
  #14  
THE Admin

 
Outlaw Star's Avatar
 
Join Date: Sep 2010
Location: Lantana, Fl
Posts: 34,036
Received 231 Likes on 187 Posts
Year: 1996
Model: Cherokee (XJ)
Engine: 4.Slow
Default

Originally Posted by Lew 52
Thats cool , where go you guys go 4 wheeling at ?? i know corbett , but i think thats a swamp this time of year with all the rain , i heard there was a place at the end of hypoluxo ??
Was a place. Its closed down now. We have some private property out by Corbett we go riding on. Come say Hi to the rest of the crew on South Florida Dysfunctional 4x4s in the Southeast wheeling neighborhood.

Last edited by Outlaw Star; 08-12-2012 at 10:16 AM.
Old 08-10-2012, 06:00 PM
  #15  
CF Veteran
 
NorCalJeep's Avatar
 
Join Date: May 2011
Location: Santa Rosa, California
Posts: 2,135
Likes: 0
Received 1 Like on 1 Post
Year: 1987 Comanche,1990
Model: Cherokee
Engine: 4.0L Renix
Default

Did you get an alignment after you lift install? That could cause vibration.


Quick Reply: My first post



All times are GMT -5. The time now is 05:19 PM.