I am looking at possible 5 inch bastage lift on the cheap, for now, adding on to my current 3 inch setup. What are some reccs for a adj trak bar, and an sye., where do i look for the compatible drive shafts and or cv setups, thought id see some in the 4wd catalogue with the sye stuff, but to no avail! Also, a street friendly shock as my junk unfortunately sees 80% street, 19% repair bay, and 1%trail !! Thanks

 

dont need a sye unless ur going over 4.5 mabye 6 but get longs arms for one and ur trac bar should be fine up to 6 inches. dont get blocks. o and get 2 in shackles on the rear and mabye 4.5 springs in the front

 

5" you're probably going to want an SYE

 

Yea, currently i have blocks in rear(free), 3 in coils in front, putting 3in spring packs in this coming week, gonna use the blocks as wheel chocks after that!! lol Figure a 4.5 or similar coil for the front with a spacer (eventual winch), and a 2 inch shackle wich i have yet to un box for the rear. Aside from brake lines and such, what else other than sye and trak?