added the stock 1/2" spacer back, and retorqued on the ground

still doesnt look level
hope it works itself out soon

 

just drive it around for a while, some leaf springs need to be "broken in" so to say. some weight in the back can help accelerate the process.

 

this and flex it out a few times. it should equal out.

 

forsure thanks guys!

 

I have the OME lift kit as well. You have to use the rubber spring isolator AND the yellow 10mm OME spacer up front.

The back will settle, give it two months or so.

 

......updates??? Pics??? How's it ride??

...

 

I reused the OE spacer, and after the springs settled its betetr now. thanks!

It rides stiff! Feels like a sports car with 9K high spring rates!
And thats how I like it haha
As you can see in the above picture^ it is because my rear shackle angle is exactly at 90degrees.

Getting something like a shackle relocation kit would help with a better shackle angle, and a smoother ride.

But I would recommend OME stuff to anyone! Quality product and it was afforadable!