Lift kit measurements
#1
Member
Thread Starter
Join Date: Dec 2011
Location: Waynesville, NC
Posts: 188
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee
Engine: 4.0 L I6 H.O. (242 CID)
Lift kit measurements
okay so i've got a 1988 4 door jeep cherokee i put a 2" skyjacker lift on it, if i were to put a 3" rough country lift on that what size lift would i be sittin at?
#4
youd be sitting at..3 inches??
unless your current 2" lift is made up of spacers/shackles/blocks, then you could add those parts to the roughcountry lift and end up with 5".
if the 2" lift you have now and the roughcountry lift use spacers in the front then you cant combine the lifts because you cant (well, shouldnt) stack spacers
lol...
unless your current 2" lift is made up of spacers/shackles/blocks, then you could add those parts to the roughcountry lift and end up with 5".
if the 2" lift you have now and the roughcountry lift use spacers in the front then you cant combine the lifts because you cant (well, shouldnt) stack spacers
lol...
Last edited by rompnXJ; 09-09-2012 at 04:04 PM.
#6
CF Veteran
Join Date: Jul 2010
Location: 802
Posts: 4,930
Likes: 0
Received 3 Likes
on
3 Posts
Year: 99
Model: Cherokee
Engine: 4.0
Originally Posted by rompnXJ
youd be sitting at..3 inches??
unless your current 2" lift is made up of spacers/shackles/blocks, then you could add those parts to the roughcountry lift and end up with 5".
if the 2" lift you have now and the roughcountry lift use spacers in the front then you cant combine the lifts because you cant (well, shouldnt) stack spacers
lol...
unless your current 2" lift is made up of spacers/shackles/blocks, then you could add those parts to the roughcountry lift and end up with 5".
if the 2" lift you have now and the roughcountry lift use spacers in the front then you cant combine the lifts because you cant (well, shouldnt) stack spacers
lol...
Thread
Thread Starter
Forum
Replies
Last Post
JPXJMOAB
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
09-06-2015 07:16 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)