Lift help!!!
#1
Junior Member
Thread Starter
Join Date: Feb 2011
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Lift help!!!
So I have a 1.5" booster from rough country on my 00 xj as of now...i want to go bigger but am not sure if I should get a 3" or 4 or 4.5"...my friend says id need a slip yolk eliminator and longer drive shaft plus a transfer case drop if I went above 3" or I would "grind" gears when I flex even a little...
Is this correct..?
Thanks!!!
Is this correct..?
Thanks!!!
#2
CF Veteran
Join Date: Jan 2011
Location: Missouri
Posts: 2,251
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0HO
your friend is somewhat misinformed...
MOST (but not all) 1996 and newer Cherokees need at least a tcase drop at 3-4 inches
you will not grind gears, but you will vibrate
will yours do it?
You will not know until you install your lift...
I would get a 3" lift if you only plan to run 31s
anything bigger would mean a lot more parts
MOST (but not all) 1996 and newer Cherokees need at least a tcase drop at 3-4 inches
you will not grind gears, but you will vibrate
will yours do it?
You will not know until you install your lift...
I would get a 3" lift if you only plan to run 31s
anything bigger would mean a lot more parts
Thread
Thread Starter
Forum
Replies
Last Post
Sandyman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-10-2015 09:21 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)