Leaf Spring Rebuild
01-06-2012, 10:13 PM
#1
Junior Member
Thread Starter
Join Date: Dec 2011
Location: El Paso, TX
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0L I6
Leaf Spring Rebuild
My leaf springs on my 97 are worn. I picked up a pair off of a 93 with about 110k on them. I have a 3" short AAL. I want to rebuild the leaf springs and install the AAL (instructions state it should be installed above the bottom leaf). The bushings look fine. In a step by step process how should I go about rebuilding these things? What size C clamps do I need to allow the tension to completely release? Should I replace the clamps? What are everyone's feelings on graphite paint? I know there is probably a thread on here somewhere addressing this, but impatience is getting the better of me at this point.
Thread
Thread Starter
Forum
Replies
Last Post
lgrant
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
07-05-2022 12:19 AM
ROCKRIDGE 4WD
Vendor Showcase
1
10-20-2015 03:53 PM
nicksan
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
18
09-25-2015 03:52 PM
Sandyman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-10-2015 09:21 AM
atlantis7
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
09-10-2015 09:03 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
