Quick question:

I have a 3" Rancho lift, and am looking into getting QDs. Basically, they are listed for either:
-Stock
-2 to 3.5 inches of lift
-4 to 6 inches of lift
http://store.jksmfg.com/merchant2/me...ar_Disconnects


would the 4-6 inches size QDs work on my 3" lift? I ask because I am looking at a "used" set, so I am curious if it makes that much of a difference

 

if they are used, they may not thread in to make them smaller if they were used for a larger lift.

but you shouldn't have much of a problem if they're not adjusted quite perfect.

 

Be careful, I have an OME 2" lift that gives me probably 1.5-1.75" in the front and I got the disconnects for 2-3.5 inches (per a phone conversation with JKS) and when I would bottom out the front end (big dip in the trail/road) the bolts on the sway bar ends would hit the fender well and started to punch holes in it. I've since swapped out for the stock length disconnects.