I want to put full size dana 44 in my 96 cherokee
04-27-2011, 08:09 PM
#17
You are mistaken. Take a look at the link I posted earlier, all of the info is there.
I've pulled many HP D44's from mid 70's Ford F100/F120 with welded on wedges, and all have had 1/2" wall tubes. I have yet to see a mid-70's axle with anything less than 1.2 wall tubes.
I never pull axles that have cast wedges for the usual reasons.
I've pulled many HP D44's from mid 70's Ford F100/F120 with welded on wedges, and all have had 1/2" wall tubes. I have yet to see a mid-70's axle with anything less than 1.2 wall tubes.
I never pull axles that have cast wedges for the usual reasons.
04-27-2011, 08:51 PM
#18
CF Veteran
Join Date: Jan 2009
Posts: 2,740
Likes: 0
Received 0 Likes
on
0 Posts
Year: 87
Model: Cherokee
Engine: 4.0
DOnt over look the drum brake 72/73 f100 axles.. Half inch tubes and ppl over look them cause they have drums. They use f150 inner shafts.. and if you do like i did you run reid knuckles and wagonner/chevy brakes and stub shafts. Best of both worlds.
04-27-2011, 09:40 PM
#19
CF Veteran
Join Date: Feb 2010
Location: Soddy Daisy TN
Posts: 5,420
Likes: 0
Received 0 Likes
on
0 Posts
Year: 97
Model: Cherokee
Engine: 4.0L
You are mistaken. Take a look at the link I posted earlier, all of the info is there.
I've pulled many HP D44's from mid 70's Ford F100/F120 with welded on wedges, and all have had 1/2" wall tubes. I have yet to see a mid-70's axle with anything less than 1.2 wall tubes.
I never pull axles that have cast wedges for the usual reasons.
I've pulled many HP D44's from mid 70's Ford F100/F120 with welded on wedges, and all have had 1/2" wall tubes. I have yet to see a mid-70's axle with anything less than 1.2 wall tubes.
I never pull axles that have cast wedges for the usual reasons.
Thread
Thread Starter
Forum
Replies
Last Post
Blackcherokee290
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
27
07-26-2022 07:52 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)