Sportykid0511

hello,
i am a new jeep owner, 98 cherokee and i bought a lift kit and now i orderd a track bar relocation bracket and i have searched everywhere to find a post with pics on how to install in. does any one know where i can fine instructions? thanks allot

Desert Rat

I just installed a Skyjacker 3" lift that included the relocation bracket. I had to get the instructions from their website (did'nt come with the kit). I would recommend adding a picture of your bracket to this thread if you can't find instructions on the manuf. website, I'm sure someone here has had some experience. My bracket was bolted to the origional trackbar mounting location with a new bolt through the existing hole, I then had to drill a second hole through the existing mount to install an additional bolt securing the relocation bracket. Pretty straight forward.

mkoutney12

I'm getting ready to install mine tomorrow, I saw that the existing nut looks impossible to get to, how'd you guys get to it?

freegdr

Drill one hole and bolt it up.

SteveMongr

Stock nut has an attached tab that extends out the access hole.

steveitaly

HI to all. I've buy a skyjaker track bar relocation bracket for my '90 XJ because 2 inches lifted but I can't drilling.... the hole in bracket is too low.

steveitaly

I don't know why The hole of the relocation bracket is to lower to do a Hole Where put Bolt. Hai Apologize For My English library from Italy but I suppose that with my picture You can understand what is my problem I need some suggestions thanks

Jeepin'_Aint_EZ

It looks like the bracket is not positioned properly. Just loosen the main bolt and rotate the bracket counter-clockwise so the hole is in the right position.

steveitaly

Problem solved, I don't know how but the bracket finally go in the right place.
I've do the hole and tighten all the bolt and nut.
all it's alright.