HID Retrofit Write-Up
Senior Member
Joined: Jun 2011
Posts: 759
Likes: 2
From: Florida
Year: 1999
Model: Cherokee
Engine: 4.0
Great write-up! I did this myself 6mo ago with Nissan Maxima bixenon projectors (used), The mirror surface was a little cloudy, I'd use new projectors like you did if I had to do it all over again.
Spent money on the TRS bixenon kit and the had a few issues, would have done a cheap Amazon kit like you did if I had to do it over again too.
Thanks for taking the time to do this for others.
Spent money on the TRS bixenon kit and the had a few issues, would have done a cheap Amazon kit like you did if I had to do it over again too.
Thanks for taking the time to do this for others.
Thread Starter
CF Veteran
Joined: Jul 2013
Posts: 1,466
Likes: 6
From: St. Joseph, MO
Year: 1994
Model: Cherokee
Engine: 4.0
Thread Starter
CF Veteran
Joined: Jul 2013
Posts: 1,466
Likes: 6
From: St. Joseph, MO
Year: 1994
Model: Cherokee
Engine: 4.0
Junior Member
Joined: Oct 2013
Posts: 46
Likes: 0
From: Virginia Beach, VA
Year: 1997
Model: Cherokee
Engine: 4.0
Will do. It's probably not gonna happen for a while i gotta figure out my oil pressure issue I probably need new motor. I have 0 oil pressure at warm idle after about 30 seconds (it's been like that the last 10,000 miles though, finish fixing my deathwoble, sye and driveshaft then hid's lol I'll probably get around to hid's in 6-10 months.
No, I don't lick fish.



Joined: Mar 2011
Posts: 11,169
Likes: 26
From: Northern Kentucky
Year: 1999
Model: Cherokee (XJ)
Engine: 4.0
Will do. It's probably not gonna happen for a while i gotta figure out my oil pressure issue I probably need new motor. I have 0 oil pressure at warm idle after about 30 seconds (it's been like that the last 10,000 miles though, finish fixing my deathwoble, sye and driveshaft then hid's lol I'll probably get around to hid's in 6-10 months.
Wheeler, check your sending unit - it may be faulty.
CF Veteran
Joined: Oct 2013
Posts: 2,097
Likes: 12
From: Tarpon Springs, FL / Denver, CO
Year: '98
Engine: 4.0 I6
I noticed a "slight" increase in intensity going from 35w to 55w HID ballasts in my projectors, and the light is a bit warmer (less blue), but the actual brightness did not increase tremendously
I do have some crappy DDM tuning ballasts + bulbs (not really that high-end), but were your experiences similar? Its hard to get a feel over video because of differences in exposure plus the camera doesn't capture as much dynamic range as the human eye does
I do have some crappy DDM tuning ballasts + bulbs (not really that high-end), but were your experiences similar? Its hard to get a feel over video because of differences in exposure plus the camera doesn't capture as much dynamic range as the human eye does
Thread Starter
CF Veteran
Joined: Jul 2013
Posts: 1,466
Likes: 6
From: St. Joseph, MO
Year: 1994
Model: Cherokee
Engine: 4.0
I noticed a "slight" increase in intensity going from 35w to 55w HID ballasts in my projectors, and the light is a bit warmer (less blue), but the actual brightness did not increase tremendously
I do have some crappy DDM tuning ballasts + bulbs (not really that high-end), but were your experiences similar? Its hard to get a feel over video because of differences in exposure plus the camera doesn't capture as much dynamic range as the human eye does
I do have some crappy DDM tuning ballasts + bulbs (not really that high-end), but were your experiences similar? Its hard to get a feel over video because of differences in exposure plus the camera doesn't capture as much dynamic range as the human eye does
No, I don't lick fish.



Joined: Mar 2011
Posts: 11,169
Likes: 26
From: Northern Kentucky
Year: 1999
Model: Cherokee (XJ)
Engine: 4.0
Thread Starter
CF Veteran
Joined: Jul 2013
Posts: 1,466
Likes: 6
From: St. Joseph, MO
Year: 1994
Model: Cherokee
Engine: 4.0
No, I don't lick fish.



Joined: Mar 2011
Posts: 11,169
Likes: 26
From: Northern Kentucky
Year: 1999
Model: Cherokee (XJ)
Engine: 4.0


