help with wiring a B&M trans temp gauge.
09-15-2012, 05:54 PM
#1
CF Veteran
Thread Starter
Join Date: Feb 2012
Location: college station
Posts: 1,116
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Comanche
Engine: 4.0
help with wiring a B&M trans temp gauge.
I am hooking up a B&M Trans temp gauge and a after market trans cooler.
It says to hook up one wire to illumination/ dashboard lights but I have not Idea which wire to splice into. Also It says to run one wire to the ignition wire, once again I have no idea where this is located. Sow help would be greatly appreciated!
The vehicle is a 1988 Comanche 4.0 4x4 auto shortbed.
Below is a picture of the wiring diagram.
It says to hook up one wire to illumination/ dashboard lights but I have not Idea which wire to splice into. Also It says to run one wire to the ignition wire, once again I have no idea where this is located. Sow help would be greatly appreciated!
The vehicle is a 1988 Comanche 4.0 4x4 auto shortbed.
Below is a picture of the wiring diagram.
09-15-2012, 08:25 PM
#2
CF Veteran
Join Date: Oct 2011
Location: Hudsonville, MI
Posts: 1,630
Likes: 0
Received 3 Likes
on
2 Posts
Year: 1986
Model: Cherokee
Engine: 5.0
There should be a spot in the fuse box where you can plug right into it for lights and key power for the gauge. It will be a empty spade connector marked park lamps, there should be a empty single spade plug next to the fuse and IGN (ignition).
Thread
Thread Starter
Forum
Replies
Last Post
Psiegrist1
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
34
03-17-2022 02:15 PM
Ye Ol' Cherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
10-09-2015 10:29 PM
Programbo
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
21
09-26-2015 11:32 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
