heim joint steering
#1
Member
Thread Starter
Join Date: Aug 2012
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
heim joint steering
So I've been reading up on building my steering with heim joints and I was wondering why almost everyone uses weld in bungs instead of tapping the actual dom being used as the tie rod and drag link for the heim to thread right into that?
#2
CF Veteran
Join Date: Feb 2010
Location: Soddy Daisy TN
Posts: 5,420
Likes: 0
Received 0 Likes
on
0 Posts
Year: 97
Model: Cherokee
Engine: 4.0L
For me I used 1.5" .25 wall DOM and 3/4" heims so the ID was to big. Also it's cheaper and easier to get the weld in bungs than buying and using a tap that size. I would have needed both right and left hand and they cost more than several sets of bungs.
#3
CF Veteran
Join Date: Oct 2010
Location: Long Island N.Y.
Posts: 1,889
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1999
Model: Cherokee
Engine: I6 4.0
Ruffstuff sells a nice D.I.Y. Kit i used its a very nice kit it comes with 2 60" sticks of 1.5 .25 wall dom 4 3/4 heims with misalignment spacers and weld in bungs check it out on theyre website
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)