Grand Cherokee coil spacers in Cherokee.
Thread Starter
Newbie
Joined: Jun 2013
Posts: 1
Likes: 0
Model: Cherokee
Grand Cherokee coil spacers in Cherokee.
Hi guys, new to the forum.
I have seen on previous comments something about swapping the actual springs to provide additional lift.
I wanted to ask if you know if coil spacers that I used to have in a 1998 zj will work in a 1991 xj?
Thanks,
Ben
I have seen on previous comments something about swapping the actual springs to provide additional lift.
I wanted to ask if you know if coil spacers that I used to have in a 1998 zj will work in a 1991 xj?
Thanks,
Ben
Senior Member
Joined: Jul 2010
Posts: 620
Likes: 0
From: Clover, S.C.
Year: 1998
Model: Cherokee
Engine: 4.0L
I know the ZJ coils from a V8 ZJ will give 1-1/4" lift to a straight 6 XJ. I'm pretty sure those spacers will work too. I actually used some poly spacers I bought (used) that were 1-3/4" for a total lift of exactly 3".
Don't forget to extend the bump stops. I used some big rubber mallet heads cut down to 3" and gorilla glued down inside the coils. Been working fine for two years now, and no sag. Not expecting any either.
Don't forget to extend the bump stops. I used some big rubber mallet heads cut down to 3" and gorilla glued down inside the coils. Been working fine for two years now, and no sag. Not expecting any either.
Thread
Thread Starter
Forum
Replies
Last Post
lpresnell
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
Aug 27, 2015 07:11 AM
Katt Dogg
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
1
Aug 25, 2015 08:03 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)