Going from 3 in. to 4.5
#1
Junior Member
Thread Starter
Join Date: Feb 2012
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Going from 3 in. to 4.5
i have a rc 3in lift right now with the aal, if i want to go to 4.5 what all do i need to get. would i need all new leafs or could i use a 1.5 rear shackle and for the front could i use coil spring spacers or would i need 4.5 in coil springs. also what else would i need to upgrade
#2
CF Veteran
Join Date: May 2012
Location: Colorado
Posts: 3,242
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1992 Cherokee Sport
Engine: Bone-Stock 242
On the springs, if you can afford it just go and get the new ones. It'll give more than the 1.5 inches of lift your looking for because they won't be saggy.
You'll probably need new shocks, I'm not sure since it's such a small step up.
You'll probably need new shocks, I'm not sure since it's such a small step up.
Trending Topics
#8
Depends on the length of your leaf springs. Ideally you want your shackles at a 30deg angle minimum, 45 is better.
This really applies to all shackles, not just the Teraflex (straight).
This really applies to all shackles, not just the Teraflex (straight).
#12
Keep it at 3 inches. Spend the money you'll save on skids and recovery then do stronger trackbar, steering, and control arms. If you have money left over after that, regear to 4.56 or 4.88s and lock it. Keeping your XJ low keeps the unnecessary costs down and makes it more capable.
#13
Junior Member
Join Date: May 2011
Location: Yuma colorado
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0L HO
Keep it at 3 inches. Spend the money you'll save on skids and recovery then do stronger trackbar, steering, and control arms. If you have money left over after that, regear to 4.56 or 4.88s and lock it. Keeping your XJ low keeps the unnecessary costs down and makes it more capable.
#15
Seasoned Member
Join Date: Sep 2012
Location: Barrie, ON, CAN
Posts: 268
Likes: 0
Received 0 Likes
on
0 Posts
Year: 99
Model: Cherokee
Engine: 4.0L
I'm doing the same. I have the zone 3" kit now and after running it, it's settled to just over 2". I've contacted zone and they've replaced the leafs once already, bt it's back down to where it was before.
I picked up rc adjustable shackles and 1" spacers for the front. I'll be sitting around 4" total by the time it's said and done.
I've been looking for add ons that I'll need to get in addition to the shackles and spacers, like lines ect. Thanks for the definitive answer
I picked up rc adjustable shackles and 1" spacers for the front. I'll be sitting around 4" total by the time it's said and done.
I've been looking for add ons that I'll need to get in addition to the shackles and spacers, like lines ect. Thanks for the definitive answer