70hemicuda

So this is my exhaust set up right now. Originally it was smacking the relocation brackets so I cut it. But decided to do this with it because I thought with the pipe pointing at the shackle I would melt the bushing. Problem is with this set up the exhaust vibrates the Jeep like crazy. I don't know why, maybe my set up is all wrong? Anyway if I cut it right before that hangar and get rid of that would that be sufficient or not. Thanks!

freegdr

Factory exhaust runs here....

Fred/N0AZZ

That is where mine is ran also inside the leaf.

Dumajones

I would cut where the arrow is pointing in the pic and put a turn down tip on the end.




turn down tip..




As for the vibes check your trans/motor mounts for play.

freegdr

Just make sure it sticks out past body. Dont need to be getting fume a gated.

70hemicuda

It's gotta be the exhaust because it started right as I put the part on. And I can't route it the factory way because the relocation brackets are in the way

Constantine

What Duma suggested is perfectly fine.
I have a turn down before the axle as many others do.