Purchased an Aussie off another forum for my 29 spline 8.25. The 2 cam gears, 2 axle gears, 2 spacers, and 4 springs/pins are there. There was a hole in the shipping box. I was thinking the cross pin fell out, but Aussie instructions are not showing a new cross pin.

http://www.aussielocker.com/download...ion_manual.pdf

Anyone have this same locker have any input? thanks

 

This is all I have. Is the stock pin strong enough to just be re used ? Thanks

 

A cross pin is not included with the locker

 

It depends on what shape it is in. If it still looks good, isn't mashed, or scared, you will be fine.

 

you reuse the stock one, if yours is somehow trashed, pull one from a junkyard

 

Huh, just posting because I'm curious, but does aussie now mill both cogs for the c-clips (both yours are)? Back when I ordered mine was around the time they forgot to mill them, but they sent a replacement cog that was milled to fit the last c-clip.